Konica Minolta Magicolor 1690MF Multifunction Color Laser Printer

• The Konica Minolta magicolor 1690MF is compact footprint of 16.0"W x 16.9"D x 17"H is perfect for desktop use and it features an easy to read display for intuitive operation.
• The magicolor 1690MF outputs original prints at speeds up to 20 ppm B&W and 5 ppm color and accommodates a monthly duty cycle of 35,000 prints.
• Replacing toner cartridges is simple with the full front access panel on your magicolor 1690MF.
• Toner yields up to 2,500 pages per cartridge.
• Copy, scan and fax multiple documents with ease using the automatic document feeder, accommodates 35 sheets of paper at a time.

On the positive side, it prints very quickly in black, a little slower in color (it's a four-pass CMYK printer, meaning it prints Cyan, Magenta, Yellow and Black in individual runs or passes) but the quality of the color images are fantastic and are only limited by the quality of paper used. It scans acceptably well, not spectacular, but more than well enough for my needs. Haven't tried the fax portion and don't foresee doing so.

There are only two negatives that I've found: the machine is noisy even when not in use; it has a loud cooling fan that will run for a long time (more than 20 minutes); and it's shipped with what seems like only a few drops of black toner. If you buy this printer and plan to do any amount of printing right away, you need to get more black toner, pronto. The toner cartridge that came with it lasted less than a week with moderate usage.

So far I like it and would recommend it. The printer part of it gets five stars, the scanner four stars. The other qualities--noise, set up, features--bring the overall rating to four stars.

Buy Konica Minolta Magicolor 1690MF Multifunction Color Laser Printer Now

I've had this printer for several months and would overall rate it as mediocre, but the base machine now sells for ~$250 online so you get what you pay for. Compared to prior Brother lasers, the KM is very noisy, slow, counter-intuitive to set up, crippled in a Mac OS 10.6 environment, and has largely dismal support online and by phone. So, be certain you're willing to accept these trade-offs in return for decent color prints, adequate scans, and OK faxes. Otherwise, pay a few hundred dollars more for a more user-friendly machine.

As others have noted, a set of OEM toner replacements costs more than the entire printer, so this is the Gillette model: give away the razors but make your profit on the supplies. Refilled toner cartridges are about half the cost of OEM and available online; refill kits, if you want to put up with the mess, could drop the costs further. One particularly annoying feature is that it's virtually impossible to cancel a print job using the buttons on the front. If there's a printing error in one document of twenty, the only to stop the machine from spitting out garbled pages filled with costly toner is to power it down and then hit the Cancel button repeated as it powers back up. I've called customer support from time to time and finally figured out that they do have some good reps who can be very helpful, so if you get a bozo, just politely thank him for his efforts and call back on the same number. It usually takes 4-5 calls in a row to find an experienced tech but it's worth the effort: they will know the limitations of the machine, which helps you avoid trying to find a workaround for inherent problems in the hardware or software.

As a color laser printer alone, I would rate the quality of the images as good. I run a small business and print 80% B&W and 20% color so this machine is adequate for my needs. In fact, I used the driver features to set up different virtual printers [B&W draft quality, color draft quality, B&W hi res, color hi res] and find that for most tasks the draft quality is indistinguishable visually from the hi res setting. I presume this is saving significant toner costs, as it did on my Brother machines, but it's possible that the reason is that this software feature doesn't do much. You probably would want to use hi res for photo images.

I've read the user manual ten times and it is really marginal: sometimes confusing, lacking in depth, and almost useless in trouble shooting. Combined with the poor customer support, this means you are pretty much on your own in figuring how to set up this machine. Fortunately, my Mac OS 10.6 software had no trouble recognizing this printer via USB connection, and then my Time Machine network recognized it too. I also figured out how to have Windows XP in a virtual environment recognize the print function if I hook it up to a USB port on my MacBook Pro. I gave up on net printing after wasting a few hours although I have implemented this on other printers without such hassles.

As a Mac user, the greatest drawback is that despite over a year of misleading sales as a "Mac Compatible" system, KM has still not released scan or fax drivers for OS 10.6. In other words, this printer is only compatible with outdated Mac OS: none of the other "multifunction" features work with Snow Leopard. I did finally figure out how to save manual scans to a USB stick using the port on the front of the machine, but after two scans is saves them skewed about 30 degrees. I'm assuming this is a hardware defect but the quality of the scans is low enough I will probably use my trusty Brother machine for scanning and faxing.

I did install the duplex adapter that also required adding a large capacity paper tray. It seems to work but the large capacity tray makes the scanner bed so high up I had to move it off of my desk to a lower table nearby. Paper handling features are rudimentary: it will not accept 8.5 x 14 or sizes smaller than a personal envelope. So, I use my trusty Brother to print deposit slips and scan or print legal-sized documents.

In summary, the KM 1690MF is the least expensive color laser printer available because it has a number of limitations. But, if you are on a tight budget and don't print many pages per month, it could fill the bill if you use Windows or an outmoded Mac OS.

Read Best Reviews of Konica Minolta Magicolor 1690MF Multifunction Color Laser Printer Here

We use this printer in our little design office, to supplement the ultra-high-quality (and ultra slow and expensive) prints from our ink-jet printer. I bought this printer to offer speed and economy for daily printing. The prints are surprisingly good, and fast enough to be a welcome relief from that ink-jet printer!

There is a bit of fan noise at times, and scanning over the network can be a little slow at the higher resolutions. But overall we are extremely happy with the printer. We've been cranking out full color prints of renderings and drawings, and there are no signs that we are running out of toner. We still don't use if for our final, photographic-quality high-gloss presentations, but we use if for all our daily stuff and interim client reviews.

Want Konica Minolta Magicolor 1690MF Multifunction Color Laser Printer Discount?

I bought this printer after much searching of all the brand names I could find. In total blind faith, I decided on this one. It seemed to have the least service problems opposed to the best features. As laser printers were never meant to produce quality photos, this printer does quite nicely for occasional medium grade photos and oustanding for my original purpose...color printed illustrations and reams of notes for my anatomy and microbiology classes.I am deeply satisfied with this printer for this purpose.

As for problems, the first page I tried to print, the paper jammed, my fault for not putting in the paper right (I was in a hurry). Also, the fuser is faulty (and they are sending me a new one at no charge) leaving a mark across two lines on the paper. It doesn't affect my notes and color diagram, but still, it's new and shouldn't do that.

I have had no other problems and Minolta is being wonderful about all my idiots issues. They were endlessly patient when, after two months and 764 pages later, I had to replace the sample toners. They lasted much longer than they were supposed to, but I set my dpi settings at 600 x 600. I still had very good quality results at that setting.They worked with me for over an hour, walking me through the installation.

All in all, I would definitely buy this product again and will endlessly recommend it to all my friends!

Save 45% Off

Overall really nice laser printer for the price and functionality. The only one out there that I can see. However if you own a Mac which is a lot of us... there is only USB scanning using Image Capture, meaning no network scanning like there is from the PC driver.

New-FRANKLIN BES-2100 DESKTOP SPEAKING MERRIAM-WEBSTER(R) SPANISH/ENGLISH DICTIONARY - FRK2100

• New-FRANKLIN BES-2100 Desktop Speaking Merriam-Webster(R) Spanish/English Dictionary

It does everything as expected! The quality of the speller was good but the translation of Spanish was excellent! They did a good job with that aspect of the speller.

Buy New-FRANKLIN BES-2100 DESKTOP SPEAKING MERRIAM-WEBSTER(R) SPANISH/ENGLISH DICTIONARY - FRK2100 Now

The reason I bought this translator is it gives the impression that you get a English/Spanish dictionary for download on your computer, hence the name "Desktop". While you do get a usb cable with the device, you DO NOT get the downloadable dictionary with it as implied!!! You must order directly from Franklin, not Amazon if you want this valuable teaching tool. It will cost you more ordering directly from Franklin, but having the English/Spanish dictionary to practice your vocabulary with is well worth a few extra dollars if this is your reason for buying this device. Overall all it is a nice little pocket size device, it is NOT a large desktop translator as one might get that impression from the add. A decent price for what you get. Works well.

Fosmon® Premium Quality Metal Stylus Styli for HTC EVO 4G Sprint ( Black + White )

• One silver + One Black stylus
• Enables easy tapping, double-tapping and scrolling
• Built-in shirt clip
• Light-weight aluminum body with soft-touch rubber tip

I like many people have been using a stylus for many years on a PDA and in more recent years possibly a stylus on a smartphone. I love the new technology and I like the new capasitive screens found on phones like the HTC Hero, EVO and also the iPhone and Droids just to mention a few. But I haven't gotten used to typing with my rather large fingers and thumbs yet. So the use of a stylus that works on the new touch only screens is a bonus for me and these Fosmon stylus work pretty darn good. They take a little getting used to for things like sliding across or down to open a different home screen or to unlock the screen like on the EVO. The Fosmon stylus is made with an aluminum barrel and a silicone like tip. The only reason I didn't give the Fosmon stylus 5 stars was that they are very short, about 4" and for someone that has large hands like myself they are harder to use like a pen. They are bigger than a regular stylus that might slide into a smartphone but not as long as pen. For me they work very well and it makes texting a whole lot easier when using the on board virtual keyboard on my HTC EVO.

Buy Fosmon® Premium Quality Metal Stylus Styli for HTC EVO 4G Sprint ( Black + White ) Now

They work on my HTC Evo 4g

A little small, but the same length of my cell phone, so it is not tiny.

Nice for drawing games and note applications.

Read Best Reviews of Fosmon® Premium Quality Metal Stylus Styli for HTC EVO 4G Sprint ( Black + White ) Here

product is so so kinda hard to use but ok i guess its at an angle cant use the tip only flat surface evo 4g

Want Fosmon® Premium Quality Metal Stylus Styli for HTC EVO 4G Sprint ( Black + White ) Discount?

I was glad to get this (2) stylis because I got a Droid phone and I was not ready for the touch screen that was so quick and this help get used to it

. Thank you

This item works great for me as my nails make it a bit difficult for me to use my fingertips. Packaging shown is not how I received mine. Mine came in clear celophane, but definately new. I didnt hold the packaging against the seller as I did receive 2 and they were both new in sealed clear packaging.

Piel Frama 811 Black Leather Case for Dell Axim X50(v) / X51(v)

I'm writing reviews, although I don't think this case will ever be available again... :). Anyway... the case is great, you can see the details and all the care put into manufacturing. It fits the axim well, although it could have been a bit shorter (there's a small space at the upper end of the pda). But I guess it is designed to keep also all kinds of cards etc which will make the compartments thicker and thus that space will be reduced. Long story short: if you find it, go for it! Quality manufacturing, quality leather, quality packaging!

Was very happy with this case. Everything about it was great, the box it can in, to the fit of the case. Very nice!!!!

Buy Piel Frama 811 Black Leather Case for Dell Axim X50(v) / X51(v) Now

Blue Rubberized Snap on Hard Skin Shell Protector Faceplate Cover Case for Lg Rumor Touch Ln510 / Lg

I got this for LG Banter Touch. It's a little tight, but that's exactly how I wanted it. The product came on time and in great conditions. The color is beautiful.

PalmOne IIIe Handheld

• Holds up to 6,000 addresses, 5 years of appointments, 1,500 to-do items, and more
• Measures 4.7 by 3.2 by 0.7 inches and weighs 6 ounces
• Synchronizes fast with your PC or Macintosh
• What's in the box: Palm IIIe handheld, Palm Desktop organizer software, 2 AAA alkaline batteries, DB-25 adapter

Unlike people who were "already happy" with their bulky organizers before purchasing this product, I had been wanting a Palm for quite some time. Therefore, the expectation bar was raised.

Now that I have the product, the bar was met! Some questions you may have about Palms:

1. How do I enter data? One of three easy ways: with a small pen which you use to write directly into the Palm Pilot; with a pop-up keyboard; or you can enter information on your computer and download it onto your Palm Pilot.

2. Is it hard to learn? The thing I found most amazing about this is how easy you can learn it. Usually something as robust as this product has a high-learning curve. However, that is not the case here.

3. Can you play games on it? Hey admit it, we all thought it was pretty cool when we found out we can play games on it. I have about 12 games on mine (and it takes up hardly any space at all). Now all those boring lines at the bank, airports, and sitting in doctor office waiting rooms are but a memory. ;-)

4.This one is cheaper than the others, should I buy an expensive one? That is up to you. I personally don't need to store 1,500 appointments, 6000 phone numbers, etc. I'm just a guy who likes to have things organized. This product does that and lots more. I think that one of the top-dollar ones would be overkill (at least for me it would).

5. What's the coolest thing about the product? I personally like the fact that there are literally hundreds of thousands of *FREE* programs that you can download onto the Palm Pilot.

If you are the type of person who likes to control his or her scene, I strongly urge you to purchase this product.

Buy PalmOne IIIe Handheld Now

Although this unit lacks the spacious memory capacity of most of its siblings, the Palm IIIe packs in most of their features and is an excellent entry level device to experience the convenience and fun of PDAs.

The sturdy unit easily slips into a pocket. The screen is sharp, and the adjustable contrast and backlighting options make it readable in most light levels, although it can be tough to achieve a balance in low light conditions. Two AAA batteries power it for a surprising amount of time (but extensive use of the backlight feature drains them fairly rapidly). File management through the palm OS is easily configurable, and the unit is very responsive. The Graffiti writing system can be learned quickly, and the on screen keyboard and number pad are readily accessible for those tricky characters.

I wasn't organized prior to receiving this device as a gift, and I must admit that I'm still not. The included address book is very usable, and the ability to beam "business cards" to other palm pilot devices via infrared makes it easy to record and keep track of colleagues' contact information. The day planning software, with it's configurable alarms and repeat dates is also very handy. The Palm Desktop and Hotsync software intelligently backs up data and files from the handheld unit, and schedules entered on your computer through the software are automatically updated on the device. Macintosh users take note, the included hotsync cradle terminates in PC cords, so you'll need to by the adapter to convert to Macintosh serial or the USB kit for newer Macs (both should be available on Amazon.com). If your machine is IrDA compliant, you can hotsync via infrared, but you will need to get some preliminary files on the unit through a cradle hotsync or beaming to do so.

One of the strong points of the whole Palm line of PDAs is the overwhelming number of third party applications (shareware, freeware, and high powered commercial programs with trial periods) that are available online through a variety of web sites. These files range from classic board games to old books in a Palm document format to graphics and spreadsheet programs. Free online services, such as AvantGo, even download user selectable web pages to the unit upon hotsync for review on the bus or while waiting in a line.

To learn of the variety of tasks that this device can perform, I encourage new users to check out online resources and books such as David Pogue's "Palm Pilot: the Ultimate Guide. (2nd Edition)" The book includes a Macintosh/Windows/Linux CD-ROM loaded with software for the Palm, and even though many of the programs have newer versions available, the breadth of the material covered in the text (and links to the software developer's websites on the CD-ROM) make it a worth while purchase.

Those interested in protecting their investment may want to investigate the reasonably priced extended warranty options available directly from Palm Computing (including a screen replacement program and a one year extension of the warranty).

Although I will likely upgrade to a unit with more memory for storing programs and files in the future, the Palm IIIe has served me well. Overall, this device is an incredible value for its price!

Read Best Reviews of PalmOne IIIe Handheld Here

I have heard a lot of people tell me not to get a Palm IIIe because it is not the smallest Palm model out there. . . This is a straw-man argument. I got a Palm IIIe and it is GREAT. 2MB or memory is not much for my desktop, I have 256 MB of RAM and 30 gigs of HD, but for my Palm Pilot, this is more than I will ever need! Don't waist your money on more expensive models, unless you are planning to write a dissertation on your palm pilot, and a lot more, it will hold it all with PLENTY to spare. As far as size, it is the exact size as most other palm models, and it is VERY portable. Someone said that it is visible in a sport coat, well they need to trim down a few pounds then, or buy a coat that fits. Not only do I keep mine in a sport coat pocket, I keep it in the smaller pocket on the inside left of most of my coats. I wear a 39 Long so the pockets are smaller than most coats anyway, and trust me, you can't see or feel it. The Palm IIIe is a Great buy, and a heck of a Palm Pilot, no upgrade is needed, unless you want to connect to the web with no wires, then get the Palm Vii and pay $44 a month. Hope this was helpful.

Want PalmOne IIIe Handheld Discount?

I agree that the IIIe is a good value. The built-in applications are both easy to use and flexible. It is simple, for example, to display all your memos, or just those to do with work, or just those to do with personal matters.

I found the display plenty easy to read, and the software set up quickly on the computer. I found its handwriting language easy to learn. You do need to make sure, however, that you have a spare serial port on your computer; I had to install a new one, and that turned out to be a pain (so much for Plug and Play). I have had some problem using the synchonization eith Netscape e-mail; I needed a new MAPI32.DLL file, and the synchonization isn't set up well for using multiple Netscape configurations.

There's plenty of software out there for purchase or simply for the downloading. I found a very handling shopping-list program that I wouldn't do without now, and I'm trying out a checkbook program. But my favorite toy so far is AvantGo Web browsing software. It really does work. And games play reasonably well -my kids keep wanting to play them. But don't expect the crisp, active-matrix game display of a device made for that purpose.

The 2 megabytes of RAM seems to be plenty. Even after loading the IIIe up with e-mail and AvantGo (half a megabyte including downloaded Web pages) I still have nearly half the memory left.

The IIIe won't upgrade, but from what I've seen most of the software out there will run on 2.0 (my IIIe has 3.1). By the time I need an upgrade it will probably be time to buy a new organizer anyway.

The main negative is the outrageous price for peripherals. A modem and keyboard together cost more than the unit itself.

Save 37% Off

I usually don't like PDAs, because I remember all the appointments and I use my cellular to store phone numbers, that's why I only bought a IIIe. I figured if I don't like it, I'll be able to sell it quick. Well, now I can't live without it ;) Not only do I have all my phone numbers and adresses on it, but the programs you can download are so many and most of them are freeware, I now use my Palm IIIe all the time. I don't think I'll let it go, I would prefer to keep it and buy another Palm with more memories, but not right now, I'm using only half the memory of my Palm right now, I still have time ;) And now lots of my friends are going to follow me and buy a Palm :)

Aficio Sp C242SF Laser Printer

• Move from job to job quickly. The SP C242SF produces copies and prints up to 21 pages-per-minute for both full-color and black-and-white documents
• Expedite printing and manage multiple jobs easily with a powerful 400 MHz controller and 256MB RAM
• Offer convenient access for shared use in growing offices with standard networking- including IPv6 support-and an optional external wireless Ethernet adapter
• Capture, edit and send information instantly. A full suite of Scan-To document distribution capabilities allows users to leverage existing infrastructure to improve document-related processes
• Send faxes anywhere at the fastest available speeds with a 33.6 Kbps Super G3 Modem, built-in desktop PC faxing, Internet fax, 200 speed dials, authorized and paperless fax reception and more

The product appears to be ok. It has some features that are not as good as the earlier "20" model. The real problem is the supplier. The printer face was scratched, like it had been used. The supplier said "Thank you for your order, it shows the item you purchased is a brand new item. If you are not satisfied with the product you may return the item within our 30day return policy as long as inks/toners are not installed yet." This is not much help as all the packaging had been disposed of. Shame on me. Also, the printer came with the inks/toners already installed. If this supplier comes up again on an Amazon purchase, I'll probably pass.

512MB Memory Stick Pro Duo

• 512MB capacity
• High speed transfer rate
• Compatible with Sony PSP - save game levels, listen to digital music, play favorite video, download & store game cheat codes, characters & game skins
• Embedded MagicGate technology for safe transfer of copyright protected content
• MLC memory and controller technology

It says 512 MB, but when I first put mine in it said 468 MB or something, either way, this is still a GREAT memory stick for the price. ( I can't believe it's so cheap on Amazon, at best buy mine was 80 bucks. )

Definite must buy for anybody with a PSP that wants to take full advantage of its capabilities.

Notes: I have about 6 spongebob squarepants episodes on my PSP. ( 11 minutes or so long ) and there is still PLENTY of space left on my memory stick.

I had 95 songs on this memory stick and had PLENTY of space left. You should have absolutely no problem getting 120 or so songs on this thing, assuming they are 2-4 minutes in length.

So think about this: An Ipod Shuffle holds about 100 and it costs 100 dollars, or you can buy a memory stick that is 50 dollars or so that can hold 120 or more.

BUY IT!! IT WORKS GREAT!!

Buy 512MB Memory Stick Pro Duo Now

I got this memory card for my psp when it was $80. Now it's only $30 which is a GREAT bargain. I don't even use it though cause I keep my music and videos on my iPod. But it's good for those who don't have a iPod or who have homebrew still.

Read Best Reviews of 512MB Memory Stick Pro Duo Here

This product is a must have for PSP users out there. Not only is it a very convenient storage size, but also an affordable prize. What I really like about this product is its distinct color. For those that have more than 1 memory stick, this one can at least stand out in order to help you differentiate. I definitely recommend this product if youre just trying to play your games and are looking to not spend a lot of money on a memory stick.

Want 512MB Memory Stick Pro Duo Discount?

Am very pleased with the memory card. My son got a psp for Christmas and is glad to have a memory card like this one.

For any who are confused about the fact that even though it is a 512 MB Memory Stick, but it says that it only has 470 MBish, that's because of the way companies use the term, "megabyte". The company making the stick considers a megabyte to be 1000 kilobytes, which are each 1000 bytes, so a megabyte is 1,000,000 megabytes. Thus, the capacity of the stick is 520,000,000 MBs. However, the PSP, and all other devices, consider 1MB=1024KB=1048576 bytes. So the 520,000,000 byte capacity of the stick is considered by the PSP to be just under 596 MBs. The rest of the space taken up is by stuff needed to make it work, but it's not ALL that, just "formatting". (Yes, the companies rip you off, deal with it)

HQRP Replacement Internal Li-Poly PDA / Handheld Battery for Palm Tungsten E T5 TX PalmOne & 2x Scre

• HQRP™ Replacement battery plus HQRP™ Screen Protector;
• Li-Polymer Internal Battery;
• 900mAh High Capacity; 3.7V;
• No Memory Effect, The battery can be recharged without loss of capacity;
• CE and SGS-ISO-9001-2000 Certified; Fits Palm Tungsten E, T5, TX; 200 days warranty.

I installed this battery in my Tungsten E and fully charged it. It has not been performing as expected as it does not hold the charge. I frequently have to put it on the charger and on a few occasions lost all the information on the machine due to low power. I am retired and do not use the PDA as heavily as when I was at work yet the charge does not hold more than a day.

Buy HQRP Replacement Internal Li-Poly PDA / Handheld Battery for Palm Tungsten E T5 TX PalmOne & 2x Scre Now

The leads are soldiered onto contacts upon a plastic strip. The leads, soldier and strip are thicker than the battery and protrude on the tape side (the battery is secured with double sided tape) preventing it from laying flat making the tape useless. And the Tungsten E has zero fault tolerance. I was able to close the case but now the buttons are not nearly so tight.

Read Best Reviews of HQRP Replacement Internal Li-Poly PDA / Handheld Battery for Palm Tungsten E T5 TX PalmOne & 2x Scre Here

I had been using palm products since 1999. I had a Palm IIIX and later a Tungsten E model. When the battery was dead I decided to purchase a new one.

Since the newer devices seem to last more than a few days with a single charge, I expected the same from this product. It might not be the fault of the battery. Or it might be the fault of the Tungsten E device but the battery kept draining in a few days even if I did not constantly use the device.

As a result I gave up using my Tungsten a and that battery purchase was a dead investment for me.

Want HQRP Replacement Internal Li-Poly PDA / Handheld Battery for Palm Tungsten E T5 TX PalmOne & 2x Scre Discount?

I installed the battery on my Palm T|X. I can not be happier with the new battery. A full charge supported my continous video watching for hours, still plenty of juice left. I did not expect this battery to perform this well. Sure, a new battery on an iPod will do better, but I am not paying for that! The original Palm battery did not last much longer neither as I remember. I am appreciative, this battery saved my Palm from a trip to the recycling bin. I charge my devices everyday anyways, so it does not bother me to charge it often. People found his battery does not hold charge could be because they did not fully charge the battery. The battery indicator on Palm shows a full charge right after one unplugs the charger, even if the charging is not complete. So be patient do a thorough full 5 hour charge and the result will be better. The small screw drivers come with the battery is very thoughtful, I would never find such odd tool in my toolbox. The soldering work is quite simple. If one has a 40W solder gun, simple tipping on the end of the two wires will connect them to the board. Openning the back of the Palm is more challenging, hold the tabs back forcefully, felt like going to crack something. Not a big problem even if it does as there are four screws to hold the plate.

I looked at this kit and what others had to offer when I decided to bite the bullet and replace the battery in a Palm TX I'm still using (it has about 10 years of my travel history and makes a dandy travel alarm). I rejected this kit because while its battery may work for a Palm TX, the OEM battery is 1350mAh whereas the one in the kit is only 900mAh. Considering that it is non-trivial to change the battery I saw no point in skimping on it; i.e., this one is not a good choice. DirectFix and others sell batteries that match the OEM battery spec for between $10 and $20, which is well worth the few extra dollars given the effort required to make the replacement.

If you are willing to take this on it really isn't very hard, but be sure to check out a couple of the YouTube videos that take you through the process it will likely save you some angst. Note that the various techs in the videos do different amounts of disassembly, but if you are careful, you shouldn't need to do any more than open the case, fold it out, remove the old battery, and solder in the new one (yes, it has two wires that need to be soldered to the main circuit board, exactly like the old battery).

For the TX you will need a Torx #5 screwdriver to remove the back cover Home Depot sells a combo that has Torx 4, 5 and up for about $6 (Husky tools). The plastic case opening tool sold for all manner of devices like this one is quite helpful, although if you don't mind the minor scarring a screwdriver will produce in prying the case apart that will work, too. Since the old battery is glued to the inside of the case, it may take a bit of patience to work it loose ... I used a razor blade to break the glue membrane, speeding up the removal. Soldering in the new battery is easy if you have an appropriate iron just be careful you don't short anything out in the process ... I shuddered in watching a YouTube video that illustrated the process when the tech came perilously close to shorting his replacement battery by holding the leads side by side while removing their protective end caps. Likewise, in removing the old battery be careful to only cut one wire at a time (else you short any charge left in it across your clipper blade) and be cautious in soldering not to make more than a single contact to anything. If you've done any soldering at all to a circuit board you should be able to handle this easily it's only two easy to reach contact points. If you are a novice at soldering you may want to consider getting a more experienced friend to do the soldering.

MOFI Kangaroo Pouch Case for Nokia E7, GREEN

• GENIUNE Mofi Fashion case - Kangaroo series for ease of carrying accessories with the cellphone
• Newly released with improved material
• Automatically cleans your phone - padded design offers shock protection
• VERY SOFT - Highest Quality Velour Micro Fibre available
• Pamper your Phone and your senses. Other Vibrant Colours Available

I got this for my Nexus phone (original). It works great, and looks like a small muppet in my pocket. I'm considering glueing googly eyes on it.

BTW, even though the seller is in the UK, I got my MOFI in California in about a week.

Xbox 360 Rechargeable Battery 2-Pack

• Up to 40 hours of gameplay per battery on a single charge
• No more disposable batteries for your Wireless Controller
• Works with Quick Charge and Play and Charge Kits

The Xbox 360 Rechargeable Battery 2-Pack is perfect for any gamer who goes through battery's like crazy, or even not, The Rechargeable battery packs are perfect if you are looking for a spare or 2 packs to be on the charger at all times, ready for you to exchange them out in the heat of the battle. The only reason I give a 4 is they gave me a bit of trouble at first charging wise, but it's all fine now. In the end I highly recommend this product for anyone who is looking for more battery packs. If you have any questions comments or concerns, please comment below.

Buy Xbox 360 Rechargeable Battery 2-Pack Now

Microsoft batteries at 1/2 the price that you would find them for in the store. Can't beat it, and I will definitely be back!

Read Best Reviews of Xbox 360 Rechargeable Battery 2-Pack Here

I couldn't find these in the stores anywhere, so I settled for a Komodo brand. It specifically says for Xbox 360. The quick charger wouldn't recognize them, and neither would the play and charge. They are only a buck cheaper than on here, but what good are they if you can't even charge them!!! I won't make that mistake again. I'm going strictly for Microsoft branded gear. I'm so glad I found these here on Amazon! Don't settle for goofy knock-off brands for replacements! Amazon is the best mall ever!!!

Want Xbox 360 Rechargeable Battery 2-Pack Discount?

I purchased these brand new direct from amazon and I have to say i'm severely let down. I completely understand the matter of sometimes people receive defective products, and looks like it's my turn to be on that list. This contained two battery packs and neither pack would charge. I used my charge cable on an older pack I had just to make sure and that charged fine so obviously it's something to do with these batteries themselves. Maybe they've been sitting around in a warehouse for too long. If you're going to buy these just be very weary. If you get a good pack then great, but me personally i'm out of $20. I'll try to get the problem resolved, and if I do, I will update my review.

Save 2% Off

These batteries last very long. I game for at least 26 hours a week, I can play weeks without charging my first battery before I need to replace it with the fully charged one. I have the charge and play kit that works wonderful. I am impressed that they last as long as they do. One thing to remember is to let them drain completely before charging that will make them last longer. This is my second set of batteries as well. My first pair I bought when the xbox360 first came out and they lasted me 5 years. Well worth buying these even for the casual gamer. I saved a lot of money on AA batteries.

Bravo SE CD/DVD Publisher

• Capacity to burn and print 20 discs at a time
• AccuDisc Technology
• High Quality Printing

The Bravo SE disc publisher is one of those neat (if somewhat expensive) inventions that any small video production business (or business office) should have. Very easy to use (with one exception) both for creating disc labels and for duplicating and then printing CDs or DVDs. Up to 20 discs can be processed automatically (you can always add more) and is fun to watch (at least the first two times). The process is fast as it burns DVDs at 16x while simultaneous printing. I use discs from a local member only chain and the work great. One caveate, the label creation program is setup for print to the hub discs, you have to be carefull that images/text for large hub discs don't fall into the non-printing area (but you can create label templates to aid in that).

Buy Bravo SE CD/DVD Publisher Now

1. You need and internet connection to activate the software that comes with the printer, and you need the software to be able to use the robotic functions of the printer.

2. The printer reports it's low on ink about 100 discs before it actually runs out of ink, forcing you to either change the cartridge or click through a dialog box for each disk, so you can't leave a batch unattended.

-Other than those annoyances, it's a great machine for the price. I've made a few thousand DVD's with printed covers and the machine has performed well.

Read Best Reviews of Bravo SE CD/DVD Publisher Here

I needed to print 250 DVDs and wanted a burner and printer that could do the job without many attention from me. With the Disc Publisher I got that, so short duplication projects are done in a reasonable time and automatically.

Only con is that it only has one cartridge, so to print black it uses all colors combination, so the normal cartridge goes very fast and it doesn't give a totally black color as with the Epson DVDs printers.

Want Bravo SE CD/DVD Publisher Discount?

I've been looking for something to "jazz up" my CD's and DVD's that I make at home. I'm trying to learn to use both audio editing and video editing software. I wanted something that didn't "break the bank" but yet give a semi professional appearance in what I produce. After reading and reading many reviews and blogs on the web, I finally decided on the Primera line of products. I'm glad I did!!! This is one great product. I've been so pleased. As some of the reviewers I read have said, it's just "cool" to sit and watch the little robotic arm pick up the disks and move them over. It's very fast and does a great job. The quality is excellent and the "oohs and ahhhs" haven't stopped.

I would highly recommend this product to anyone interested in making a really nice looking DVD or CD. It really works well. I've used a couple of software packages with it and you can put pictures, song lists, details about a DVD, whatever you want on the face of the disk.

I'm really glad I purchased this item and, as usual, Amazon came through with getting it to me timely and in good shape.

Save 19% Off

The Bravo SE was shipped from Adorama Camera, in New Jersey. I received it in 3 days.

I've been using the original Primera Bravo for many years. At the time of purchase, it was nearly state-of-the-art. Over time, I replaced the CD-ROM drive a number of times, replaced the printer drive belt and burned many coasters in the process. In short, it was a pain to use. All printer cartridges that I could buy were drying out...

It took about 15 minutes to set up the device. It came with the latest versions of firmware and application software. The older SureThing label printing software works fine with the Bravo SE and is the same version as is available on the install disc and on the Primera website.

The Bravo SE is a welcome upgrade for my business. It is fast, quiet and (so far) very reliable. It comes with a new application software interface that is easy to use. The functions mirror the older application.

The Bravo SE comes with a CD/DVD burner. A Blu-ray burner is a big step up in price. My experience with the older model indicates that I can replace the CD/DVD drive with a Blu-ray burner for about $100. If I ever need to do so, it won't break the bank.

I "discovered" that burning colored backgrounds on my CDs uses lots of ink. I just print the text instead and get long life from the ink cartridges.

The only downside I have found is that using the 'Help' function requires an Internet connection.

Motorola Droid Razr M Leather Case - Book Type (Black) - XT907 - PDair

Durable construction and design that provides quick and convenient access to the phone. The case came with a removable belt clip. The magnetic strap provides a firm latch that keeps the case closed but is also easy to open.

I can flip the cover back and button it such that it's easy talk on it. The smell of leather has not faded. I don't foresee any durability issues.

Buy Motorola Droid Razr M Leather Case - Book Type (Black) - XT907 - PDair Now

Skinomi TechSkin - Screen Protector Shield for Asus EEE Pad Slider SL101 + Lifetime Warranty

• Compatible with Asus EEE Pad Slider SL101
• Virtually indestructible film with unmatched "invisible" screen clarity
• Made from the same film material used to protect military aircraft
• Smooth, non-sticky surface with patented layer of UV protection to prevent "yellowing"
• Manufacturer Lifetime Replacements

Very slick marketing, it comes rolled in a cool custom designed tube. In that respect, however, we're talking about an item that is pretty flimsy and maleable. When applied, one uses an included spray to help it glide on and hopefully avoid bubbles. Alas the spray leaves residue. On top of this there's a texturing to the material that doesn't give you a clean, flat surface like the glass. It ripples. There's no anti-glare feature, and the material used can get caught on a fingernail and torn. In all an extremely low quality product aside from the packaging.

Buy Skinomi TechSkin - Screen Protector Shield for Asus EEE Pad Slider SL101 + Lifetime Warranty Now

I bought this items with the hopes to have a no glare fingerprint free cover for my asus slider.

GOOD STUFF

The Product is obvious quality

The Packaging is really well done

The Additional Items provided to install this product was appreciated and unexpected

Instructions are clear

And they offer a free one with this review (I will going to best buy for assistance or throwing it away as I did this one)

BAD STUFF

Installing this item is a pain in the butt and Id recomend having it done for you. It is not the fault; however, of the manufacturer that I cant install it properly. Hence the 5 star rating.

I dont know if it is just the item itself; but, I always seem to have difficulty putting these things on with out success. I suppose I had hoped for an easier install this time, as I like the idea of having a fingerprint free screen. But, my screen actually looks better without one and its easier just to clean it with the cloth when needed I figure I paid $13 for a screen cleaning cloth

I went to the Skinomi you tube site to view the installation instructions and although the instructions were well done and clear, when It was over, there were fingerprints everywhere, water spots all over the inside and out of the screen ...and yes, I used all of the spritzer for my hands and the cloth...

IVE DECIDED NEVER TO ORDER ONE OF THESE SCREEN PROTECTORS AGAIN AND JUST KEEP A CLOTH WITH ME AS IT WORKS WELL.

BUT THE SKINOMI PRODUCT IS AWSOME, I CAN TELL IT IS WELL MADE AND BETTER QUALITY THAN ANY OTHERS ON THE MARKET.

Read Best Reviews of Skinomi TechSkin - Screen Protector Shield for Asus EEE Pad Slider SL101 + Lifetime Warranty Here

I have screen protectors on almost all of my electronics because I am deathly afraid of having permanent scratches on the screens. I purchased this on the same day I purchased my Asus Eee Pad Slider, and I didn't even open the package which contained my Slider until the protector arrived. That's how crazy I am about making sure that I maintain the clarity of my screens with no scratches whatsoever.

The packaging for the screen protector is nifty. It comes rolled up in a tube like a poster might get shipped in. It contains a spray which helps the film adhere to the screen, a plastic scraping edge, a cleaning cloth, and of course, the protector itself. The process of placing the screen protector on is quite easy, although it does take awhile. The instructions are clear enough that even a child would be capable of following them. The only strange thing is spraying the protector with the liquid they include I was scared of damaging my tablet!

The issue with this product arises in the air bubbles. The instructions stated that all air bubbles should disappear within a few days, but I still have a few here and there. Another problem comes up as I try to remove the air bubbles with the plastic scraping tool they include in the kit. Instead of just pushing bubbles out, it catches onto the protector and drags it a bit, leaving it stretched out and damaged.

For the price, I would say this product definitely delivers what it promises to, but there are better screen protectors available at a higher cost which won't get caught on nails and sharp objects.

Want Skinomi TechSkin - Screen Protector Shield for Asus EEE Pad Slider SL101 + Lifetime Warranty Discount?

the product was exactly what I was wanting. It helps protect the screen and went on easily. It's been doing well on my new Asus Slider.

Save 50% Off

This screen protector shield is made of some fancy military grade material that seems to really make a difference in the quality and clarity of this product. Unlike other shields where you battle constantly with bubbles, curling edges and yellowing, this product stays on, stays clear and does not leave the bubbles that other products do. This cost about the same as other screen protectors but it is, in my opinion, a much better product than the rest.

rooCASE Dual-Axis (Black) 100% Genuine Leather Folio Case Cover with 23 Adjustable Portrait / Landsc

• rooCASE Dual-Axis Folio Cover for Asus Transformer Pad TF300 / Prime TF20. Genuine Leather with Micro Suede Interior. (This case have all proper openings to fit TF300 / TF201)
• Detachable Inner Sleeve for Handheld Operation; Sleeve Reattaches to Folio by Velcro for Landscape or Portrait Viewing. (Tablet NOT Included)
• 23-Way Adjustable Angles to Optimize Landscape / Portrait Viewing.
• Magnetic Flap Closure. Elastic Loop for Stylus or Pen. Access to All Ports and Controls.
• A MUST Have for all Asus Transformer Pad TF300 / Prime TF201 10.1 Owners!!

First of all, I want to say that the PC Micro Store sent me this case in exchange for a different model that I received that was actually for the Transformer Prime. I contacted them the same day and they offered me this case which I received two days later. Communication with them was pleasant and the replies were very speedy. Very pleased with them in that respect. On to the case...

All the ports are very much available including the earjack. The cutout on the outside cover for the camera is somewhat insufficient in my opinion. This could because the thickness of the sleeve makes it a bit distant from the cover and even though aligned, I think the camera lens has more of a wide angle and still picks up the edge of the outer cover. Not a big deal as you can remove the inner sleeve as it is held by velcro and take a photo that way and then put it back in the leather cover.

The whole case feels sturdy and thick and the leather is very nice. It also has magnets in the flap to keep it secure. Shaking the tablet does not open the cover. None of the tablet sticks out so I feel confident if I drop it that the tablet inside would come to no harm.

The positions available from the ridges on the inside cover really work well. I have mostly used it landscape mode though but I expect it works just about as well in portrait mode.

One thing to notes is the outside cover had no cutout for the speaker though the inner sleeve does. The volume on the TF300T is loud enough that you can still here it fine though. I have a pair of earphones and with the jack fully exposed that is not much of an issue to me though.

Lastly, I don't have the keyboard for the TF300T and don't intend on using one so I can't comment on whether the tablet in just the sleeve would dock with the keyboard. All the docking ports are exposed but there still is some leather around the bottom.

In summary, with the exception of the camera cutout and maybe the speaker cutout, this is a really solid feeling leather case. I really like it.

Buy rooCASE Dual-Axis (Black) 100% Genuine Leather Folio Case Cover with 23 Adjustable Portrait / Landsc Now

The most user friendly feature is the multiple angles for both vertical and horizontal viewing.

All the ports and connections are easily to access while the tablet is still in the case.

Read Best Reviews of rooCASE Dual-Axis (Black) 100% Genuine Leather Folio Case Cover with 23 Adjustable Portrait / Landsc Here

This was the third case I've tried for my Asus Transformer TF300T tablet and so far it's the best. It was designed specifically with the TF300 and TF201 in mind and it shows. It's a very snug fit and it's obviously very nicely made. It's more of a rough/textured leather, but it's a thick design and looks like it would protect your tablet a lot better than many of the cheaper cases you can find online.

One of the previous reviewers mentioned that they wished that there was a clasp that holds the case together, however I found that there is in fact a magnet that pulls it shut. It's not a very strong pull compared to many of the other cases I've tried for other products and it needs to be closed just right in order for the magnet to work, but it'll do. I held it upside down to see if it pops open and it held without any problem.

Either they used weaker magnets or the fabric is so thick that it doesn't make them as effective, but you can always make an impromptu clasp using a fabric hairband. If the clasp is a deal breaker for you and you're not interested in making your own clasp then pass on this one. Since I just got it, I can't say if the magnets wear out over time.

I really liked the elastic loop for a stylus, which was a perfect fit for an average sized stylus though it may not be very ideal for really small or large styluses. Another I really found myself disliking is that the case doesn't rotate like you would think. I thought it merely swing around to different angles, but it turns out that Velcro keeps it in place and I can see that wearing out over time, so it was a bit of a let down for me.

One of the biggest things that annoyed me about the previous two cases I tried was that the charger slot was positioned at the bottom so that the tablet would have to rest on it if you wanted to use the tablet while charging. While it can turn around to give it better access, this makes it so that the camera is rendered pretty much useless since the only opening for it is on the top position.

The only reason this really bothers me is that since it's held on with Velcro you'll have to adjust it a lot if you want to use the camera and charge it without putting the charging cable under undue stress. For me it's not a really big deal since I have a cell phone and camera to take pictures, but it's a design flaw in my opinion that would have been caught if the designers thoroughly tested the product.

It's a really nice choice, but it's not without flaws. If any of these flaws turn you off then I suggest shelling out the extra money because I have yet to find a cheaper/nicer alternative to this without sacrificing quality.

Want rooCASE Dual-Axis (Black) 100% Genuine Leather Folio Case Cover with 23 Adjustable Portrait / Landsc Discount?

Not a bad case for the money. It's nice to be able to stand the tablet in standard and portrait mode. The only thing I would like added would be a clasp or clip to lock it shut when you're carrying it.

Fintie Dual-View Multi Angle Leather Folio Case for Google Nexus 7 Tablet with Auto Wake/Sleep Featu

• Dual-View Multi Angle Leather Cover for Google Nexus 7 Android Tablet
• Environmentally Friendly Vegan Synthetic Leather. Soft Interior Lined with Non-Scratch Material.
• Detachable Inner Sleeve for Handheld Operation; Sleeve Reattaches to Folio by Velcro for Landscape or Portrait viewing.
• 20 Degree Typing Angle and Adjustable Viewing Stand Between 45-90 Degree. Magnetic Flap Closure with Built-in Sleep / Wake Feature.
• Elastic Loop for Stylus or Pen. Access to All Ports and Controls. Available in Black, Green, Purple, Magenta, Navy, Orange, Blue, Red and Dual Color.

This case is a good looking in brown/black. The brown part has a little more tack which is a nice touch. The case also has an elastic band holder on the side which holds a stylus, another nice touch. The case can prop up the tablet in portrait and landscape as long as you use the velcro correctly. Overall, the case fits the Nexus 7 snugly with adequate protection.

However, this is where it goes downhill. The unit I received doesn't close the flap all the way down on the top right side, but it does on the bottom right. I guess there is a problem with the magnet in that particular area in my case. I see a weird S outline in the brown leather part, almost like dried hot glue. Also, MAPS AND COMPASS DO NOT WORK WHILE USING THIS CASE, it makes the sensors in the Nexus 7 go crazy. In Maps, my pointer would be spiraling or be pointing in the completely wrong direction... Not good!

Buy Fintie Dual-View Multi Angle Leather Folio Case for Google Nexus 7 Tablet with Auto Wake/Sleep Featu Now

I bought this for my son's Nexus. He is four and could care less about what it looks like, but there was one thing I didn't like. The case covers up too much of the screen. There is a slide down notification bar at the top of the nexus screen that you cant reach without having to dig up under the cover. Other than that, I have no complaints. It surrounds the Nexus and protects it from falls.

Read Best Reviews of Fintie Dual-View Multi Angle Leather Folio Case for Google Nexus 7 Tablet with Auto Wake/Sleep Featu Here

This case isn't perfect, but it is very nice for the low price range. I'm writing this review because from the pictures it's not completely obvious how it works. Essentially, there are two parts: an inner sleeve that wraps completely around the Nexus 7 and an outer cover. The inner sleeve is completely detachable from the outer cover and its back is covered in "soft" velcro. The sleeve is almost a case on its own, and is pleasant enough to hold, feeling soft and fuzzy. It also has a pen/stylus holder (black elastic you see in the pictures on the upper right) and four small velcro tabs.

The sleeve attaches to the cover through a long strip of "rough" velcro, most easily seen in the orange color pictures. Since the entire back of the sleeve can stick to the velcro, it can be positioned in various ways. When upright, the four small velcro tabs keep the bottom of the screen from sliding around the cover.

One other note is that there are speaker holes in the sleeve but NOT in the cover. When used apart from the cover, you get ~100% speaker (not quite 100% since they are holes, not a slot). When open like a book, the speakers are muffled. When upright and landscape, you get 50% muffled speakers. Finally, when upright and portrait, the sleeve holes are fully exposed.

Caveats of the case? Well, considering the price they are minor:

1) The design of the sleeve makes it hard to hit the edge of the Nexus screen. There are several covers with this limitation. I don't think I've seen any rotating covers that do not surround the screen, though, so it's just a trade-off to be aware of.

2) The workmanship isn't perfect. Note there is a two-star review of someone whose cover didn't close perfectly. My cover is fine but the Nexus sat a little crooked in the sleeve before I gave it some extra tweaking. The sleeve isn't perfectly square.

3) The magnetic on/off feature works great! But, it can interfere with your compass. Since the magnet is in the cover, just remove the sleeve from the cover if you need an accurate reading.

I spent a LOT of time looking at cases on Amazon. Keep in mind that many of the $20-$30 cases are equivalent to $10 cases, just different branding! Have fun finding something you like. :)

Want Fintie Dual-View Multi Angle Leather Folio Case for Google Nexus 7 Tablet with Auto Wake/Sleep Featu Discount?

I received this product on the exact date it was promised. I really like the look of it. It looked professional, unlike some other folios I have looked at. I ordered it and thought "what the heck", for a few dollars let me check it out. My wife and I love the look and feel of this product. Professional looking and inexpensive (read as not cheap).

Save 67% Off

This is a fantastic product that I use on a daily basis. I like the fact that it turns the Nexus on and off just by opening or closing the cover, and it is very durable. I'd recommend this to anyone looking for a good cover for their Google Nexus 7.

Gomadic Intelligent Compact Car / Auto DC Charger for the HP iPAQ hx2495 / hx 2495 - 2A / 10W power

• Intelligent circuit provides precise output voltage and resistor configuration specific to the HP iPAQ hx2495 / hx 2495. This ensures battery is safely and efficiently charged without affecting battery longevity.
• Gomadic TipExchange Technology protects your investment by providing a means to change/upgrade your charger by simply swapping the physical charging tip. (Charging tip for HP iPAQ hx2495 / hx 2495) included with additional tips sold separately)
• Charger provides a full 10W (2,000mAh) of available current in a small form factor a little over 1 inch long. Flexible, straight cable measure 50 inches in total length.
• Straight, non-coiled cable design allows for easy routing of your charger around vehicle trim for a more professionally installed look. Durable construction is built to last.
• Built using high quality capacitors and circuit components to ensure that charging current does not interfere with FM radio transmissions. Rigorous Q&A process.

I always need a power source for my Ipaq but never had one, now that I have one I havn't needed it yet. I recevied it right away, the delivery was great and the product looks brand new. very happy with the purchase

Save 34% Off

REALOOK Pentax K-X Digital SLR Screen Protector, Crystal Clear 2-PK

• Perfect Fit on your Pentax K-X LCD screen
• Crystal Clear and Color Brilliant
• Superior Scratch Protection
• Bubble Free Easy Installation
• Complete Installation Accessories and Manual

This product arrived promptly, was easy to attach, it fits the Pentax K-x screen well, and the price was good. Plus, you get a backup for when the first one gets scratched. What more could you want?

Save 33% Off

rooCASE 3n1 Executive Portfolio (Black) Leather Case Cover / Anti-Glare Screen Protector / Capacitiv

Well made and worth every penny.

The product arrived quickly and in good condition, shipper did not delay in getting the item in the mail, A+ there.

The bundle of goodies setup quickly and the anti-glare, screen protector has (2) in the package. This was awesome because if you mess up the first one (which any little speck of dust will do) you have an extra!

I probably won't use too much of the stylus, but it does work... and works well.

The case itself is really nice! Looks like it will definitely take a fall or two and protect the tablet on the inside. The modular tablet case inside wraps around the tablet and is secured in by Velcrothe design was good up to the SD card slot. I had to take an exacto/razor blade and carefully remove some material so I could still access the SD. No biggie there but would have been nice NOT to customize the interior right away. Everything else is in the right place and the inside can be turned around so the charging cable can be attached while still in the case. The front/rear cameras are exposed without blockage too.

There is still room inside for a normal pen and a few half-sheets of paper or business cards so that feature is very nice.

The stand is heavy enough that the case does not fall over on itself or close suddenly. It has a magnet inside so when you fold it awayit stays put!

I am overall impressed with the quality so I didn't dock a star for the "mod" I had to do for the SD card slot.

Save 45% Off