PalmOne Tungsten T and T2 Hard Case P10897U

• Hard Case for Palm Tungsten T
• Compatible with Palm Tungsten T/T2

Having recently purchased the terrific and super-compact Tungsten/T, I was anxious to protect it with a hard case. I expected the Tungsten/T hard case to be similar to my previous Palm V hard case -hard shell protection with minimal size -but was very disappointed in the size of the Tungsten/T case.

Sure, it's sleek and carries out the design theme of the Tungsten/T itself. It is also beautifully engineered, using a clever mounting which allows the Tungsten/T to slide open while mounted in the case (with the cover open), plus when closed a cutout allows access to the voice memo feature. Another clever addition is the dual SD card holder integrated into the inside cover (although I personally have no need to carry extra cards).

The size is simply excessive. The compact-sized Tungsten/T alone is only 4" tall by 3" wide by 5/8" thick. But in the case, the dimensions grow to 4-3/8" tall by 3-3/8" wide by 7/8" thick. The external hinge causes the width increase, while the 40% increase in thickness is caused by a combination of the SD stick storage and standoffs which give extra clearance from the screen and buttons. If you carry your palm in your purse, briefcase or jacket pocket, the size may not be bothersome, but if you carry it in a pants pocket, the size increase is significant. If you previously owned a Palm V (or Vx)with the minimally-intrusive Palm hard case, you may be disappointed with this one, as am I.

After all, didn't you buy the Tungsten/T largely because of its super-compact size? Then why does Palm think we want to significantly increase its size by using an oversized hard case for it?

Buy PalmOne Tungsten T and T2 Hard Case P10897U Now

The case is fairly well made and will no doubt protect your Palm reasonably well; however, I quickly grew disenchanted with it for several reasons.

First, the case does not completely enclose the Palm, a fact that is not evident from the pictures. When closed, the top and left side are still exposed, allowing access to the stylus, memory card, IR port, power button, audio jack and voice memo button. It's very possible, then, for the memory card or stylus to be ejected while the unit is in a purse or backpack, or for the unit to be turned on. While access to the jack and record button could be useful, it's unclear to me why the designers thought that access to the Palm's top was necessary. There's also a thumb cutout in the back panel for some reason, perhaps to aid in removing the Palm from the case. but it is hardly necessary.

Secondly, Palm's marketing material claims that the case allows you 'full access to all Tungsten T handheld features.' That's true only if you don't consider using Graffiti a feature, as you can't expand the Palm -and thus can not enter any data -while it's in the case.

Thirdly, the claimed 'spring loaded hinge and attachment clip to hold your device securely in place' is hardly that. The attachment clips are perhaps 2mm long. Pressing the power button or inserting/removing a memory card requires enough force that you will also unseat the Palm from the case.

There are additional flaws. The expansion card slots are polarized, for some unfathomable reason, so that cards can only be stored so that the card contacts are exposed and the label can't be seen. And the spring loaded hinge doesn't always keep the case completely closed. It sometimes gapes open a few millimeters, allowing any sharp objects that might be in your bag with it the opportunity to get in and scratch the screen. Finally, the packaging also claims that the case has a cushioned lining. You can probably guess that there is none; the case is aluminum over plastic.

Read Best Reviews of PalmOne Tungsten T and T2 Hard Case P10897U Here

I just got this hard aluminum case for my Tungsten T (TT). I absolutely love it. While considering which case to get, I checked out the leather case by Palm, too, but it didn't look nearly as good as this hard case. In fact, I thought the leather case looked poorly made in comparison.

Here are some reasons why I like the hard aluminum case:

1. You can see and feel that the case is custom made for the TT. My TT fits nice and snug in the case (which is a wonderful feeling).

2. The springs in the case and two rectangular holes in the back of the TT (take a look) are used to secure the TT in the case. It works fabulously. With a swift, effortless (I'm not exaggerating) move (gently pressing downward and pulling the Palm towards onerself), the TT can be removed from the case. This makes the hard case superior to the leather one, which uses clips on both sides like the cheap plastic cover that comes standard with the TT. The clips just don't feel as secure and tend to loosen after a while. I always feel like I have to be extra careful when dealing with the clips. Not the case with the springs.

3. The hinges that hold the case cover are great. The cover doesn't just flip open and dangle about. Sure, they're plastic, but they're also cleverly made so that you can open the case cover at 120 degrees or 180 degrees. When you close it, one gets a nice click.

4. I don't think the case is made of aluminum, which is actually a plus for me because the material has more give and is softer. The material is definitely more scratch-resistant than real aluminum.

5. My TT feels well-protected. Every part of the TT, except the top and the bit where the earphone jack and voice memo button are, is covered by the case. The fact that the bottom is covered is especially significant. This way, I don't feel like my TT will slide off and/or drop when I use it while standing and holding it more vertically.

I have to agree with some of the other reviews that this case might not be as ideal for lefties. And yes, the case increases the size of your TT, but it doesn't bother me. Honestly, any decent case out there would make your TT bigger. The other common criticism about this case is that one can not pull down and use the grafitti section when the TT's in this case. The solution is simple: PULL UP INSTEAD! In fact, the case is conveniently designed to make pulling up to expose the grafitti section easy.

The case takes a little getting used to, but once you know how to use it, you'll appreciate it.

Want PalmOne Tungsten T and T2 Hard Case P10897U Discount?

I was wondering why I could not find this hard case anywhere that the Tungsten was sold, and I had to order it online.

Upon receipt of the case I figured out why: on the internet you can fool people by showing them a picture of an "aluminum" case and it looks aluminum. You can't fool people when the item is right in front of their eyes.

Do not be fooled: this case is made of ... plastic. The hinge is also made of plastic, and every time I open the case it feels like it is about to crack in half.

If you are left-handed, this case will not feel ergonomic in your hand, as the person from Ireland pointed out below.

When the item this case is supposed to protect is more rugged than the case itself, you know you have a problem.

It is a shame that such a well-made, classy item like the Tungsten does not have a decent case to hold it.

Save 62% Off

I rec'd. this case a few days ago, and overall am quite pleased. While I was under the impression that the case was aluminum, actually it appears to be vapor metallized aluminum on plastic (i.e., more plastic than aluminum). It holds the Tungsten very secure in the "closed" mode (i.e., w/ the slider closed rather than extended)and quite secure w/ the Tungsten's slider extended. Other benefits:

-2 slots inside the case for extra SD cards

-a cut-a-way on the side of the case for easy access to the voice recorder button

-open top for easy access to power button as well as to slide open (extend) the Tungsten

-it's still small enough to fit into a normal shirt pocket and not be too bulky / obvious

-a cut-out on the back to make extending the Tungsten very easy while still keeping it in its case

-a nice, "Palm" embossing on the front that's not too large / obnoxious

The case could be improved if it had the option of attaching a belt clip, was a bit more sturdy (metal), and was a bit less expensive. ... seems a bit steep for this case.

Minnie Mouse iPad Sleeve

This is a very attractive, very well-made slip cover. I just love it! It is so much fun to use and fits not only the ipad but also a cover on the ipad.

The Joy Factory Tournez2 Retractable Carbon Fiber Clamp Mount with 360 Angle Adjust for iPad 2 - Bla

• Easily attaches to your desk, countertop, bookshelf or table
• Rotates 360 degrees for flexible landscape and portrait viewing
• Flexible carbon fiber arm adjusts to any angle or height for comfortable viewing and hassle-free operation.
• Lightweight and easy to fold and swivel of the way until you need it
• Detachable protective hard shell is compatible with Folio 360 II Case/Stand.
• Strong carbon-fiber construction and modern stylish design blends in with any décor.

This actually works really well. I only wish the arm was a little bit longer! I use it when I'm in bed so I can read or watch movies without my arms getting tired from holding the pad all night. But I don't have a headboard on my bed, only a shelf to the left of it. The clamp works very well on the shelf and holds tight. But you REALLY have to crank down hard on the lever with the pivot ball and if you don't get it tight enough it will slowly slip down and down and down LOL! Sometimes I'm afraid I'm going to break the shelf off because I have to crank it so hard.

I love the fact that the 3 "joints" make it very maneuverable, but I wish there was an easier way to just push and pull it so I didn't have to adjust all 3 arms when I want to move it out of the way.

I do use it quite often though, so it was worth it.

Buy The Joy Factory Tournez2 Retractable Carbon Fiber Clamp Mount with 360 Angle Adjust for iPad 2 - Bla Now

I've had this product for about 8-9 months now and at first it seemed like a no brainier to get a product like this. I was practically shoving dollar bills in my cd drive to get it faster. It attaches to most all reasonable surface thicknesses and is really handy when it comes to watching movies or reading ebooks in bed. It was performing great up until 3 months ago when I noticed that the base of the arm was getting a little wobbly. I shrugged it off thinking that it wouldn't get worse over time. But I was wrong. My iPad met my new hardwood floor in the most unfortunate of events. It was enough to keep me from using it again.

Sent from my computer

Read Best Reviews of The Joy Factory Tournez2 Retractable Carbon Fiber Clamp Mount with 360 Angle Adjust for iPad 2 - Bla Here

This product is a must have for anyone who needs the wants to work on the iPad for an extended period of time. The product is easy to install on any desktop or table. Once the iPad is mounted, it can be locked into any position. Each arm joint has a locking ball head that allows you to easily move the ipad to any position you want. The only drawback is that the last ball joint is plastic and squeaks quite a bit. If you want to use your iPad to do real work, this is a must have.

Want The Joy Factory Tournez2 Retractable Carbon Fiber Clamp Mount with 360 Angle Adjust for iPad 2 - Bla Discount?

It's a stand , i don't have a lot to say. It works.... just like most stands do. if your looking for a rope you should probably buy a rope. but if your looking for a stand then this is the perfect thing for you !!!!!

Enjoy!

PDair Leather case for Motorola DROID X MB810 - Book Type (Red)

First, while I am not impressed, I am NOT returning this product to Hong Kong! NOTHING in the ordering process states this is the point of origin. BIG ISSUE!! I ordered on 1/8/11 and when I didn't see it for, oh 7 days or so I followed the email which listed it as shipping via Hong Kong Post. Nice that it shipped on 1/16/11 and I received it today 1/26/11. Better than the package tracking which still reads an ETA of 2/3 to 2/21/11. (I will say nothing to the Chinese goverment about it being listed as a "gift" on the declaration sticker. Um... if it's a gift, may I please have my $27.99 back?)

Next, the item is illustrated well, however the tab which connects the top and bottom panels is just a tiny bit (2mm) too short to adequately (comfortably) cover the Droid X. The closing tab is also about 2mm short because you must really pull on the tab to get it to close. These two shortcomings make the case bow in the middle and out at the top and bottom.

Otherwise it appears well made. Just an inconveniently tiny bit small for it's intended use.

Can I recommend it? Noooooooo.

I may reconsider sending it back... I'll look into it.

Sharp Electronics EL243SB 8-Digit Twin Powered Calculator

• Twin-powered basic hand-held calculator
• Extra large, 8-digit LCD display
• Twin power solar operation automatically switches from solar to battery power in low light
• 3-key memory includes memory plus, memory minus and recall/clear memory keys
• Includes percent, square root keys, and sign change keys
• Twin power solar operation automatically switches from solar to battery power in low light
• Extra large 8-digit LCD display
• 3-key memory includes memory plus, memory minus and recall/clear memory keys
• Includes percent, square root keys, and sign change keys
• Attached hard cover

The best thing about this calculator is that it's got a cover that latches. No, it doesn't lock, but that little hard-plastic door closes over the keypad, so when I toss it into my briefcase and head out, I don't have to worry about damage to the keypad, or the thing being turned on and staying on as a stray pen or something just keeps pushing its buttons. The main power source is light, but it's got a simple battery backup, the batteries being accessible when you pull two small philips-head screws from the back of the case.

This thing is small and mobile, and is perfect for my mobile business needs. I'm not going to be plotting spacecraft trajectories or formulating amino acid degradations today, so I don't need anything more than the basic arithmetic functions it offers (as well as %, square root and basic memory functions).

The buttons are just the right size, not so big that I feel like this thing is a learning toy for a 2 year old, or has been made for the myopic over-70 set. The buttons are big enough that I can quickly tap out my work without mashing down multiple buttons.

To conclude, if you want a small calc you can tote with you and that will not let you down by running out of power, this is the one. If you're after a reliable little machine to crank out your daily checkbook totals or to tally up the pro-rating on your timesheet entries, then this is the one you want. Recommend.

Buy Sharp Electronics EL243SB 8-Digit Twin Powered Calculator Now

If you want a VERY BASIC, SMALL calculator that only adds, subtracts, divides, and multiplies, and has a memory, square root key, plus/minus key, and percent key, this is the one to get. Most important is that it has a CE ("Clear Entry") key: If you're adding or subtracting a lot of numbers and enter an incorrect value halfway through, you can delete it from the display by pressing CE without disturbing the calculations that you've already done. NEVER BUY A CALCULATOR THAT DOES NOT HAVE A CE KEY, because if you enter a wrong number somewhere along the line, you'll lose all your work when you press the only Clear key, which clears everything! (As you can tell, I made this mistake.) The buttons are a good size (not too small or too large), the calculator takes up very little room on a desk or in a purse or briefcase, and it calculates quickly. The cover is attached and unobtrusive if you just want to leave it on a desk. After five years, the calculator is still working fine. At this low price, I'd have no problem replacing it once a year if necessary.

Read Best Reviews of Sharp Electronics EL243SB 8-Digit Twin Powered Calculator Here

My old calculator bit the dust and I needed a new one for balancing my checkbook. I purchased this one solely on other customer's reviews. It does an excellent job of calculating. It's not as comfortable in my hand as my old one, but I can always lay it on the desk while using it. I'm very satisfied for the amount of money I paid.

Want Sharp Electronics EL243SB 8-Digit Twin Powered Calculator Discount?

It's a good calculator for a good price. The cover protects the keys and folds flat to the back when open, so it's out of the way. It has all the basic features and it's small. Just what I was looking for.

I'll never understand why companies make calculators without punctuation. It's much harder to read the numbers without commas. Sharp says that the unit has punctuation. It doesn't. The description is deceptive both here and on Sharp's website.

iDream365 Pack of 6 Capacitive Touch Screen Tablet Stylus/Styli Pen for Kindle Fire, Kindle Fire HD

Thank you for making such nice pens with brilliant colors. I enjoy using them everyday and the tip of the pen moves smoothly across the screen. This is really a nice product and was shipped promptly and arrived before the delivery date. Thanks again.

I shared my Stylus Pens with my family, we all love them. It makes it easier to use our electronics.

Buy iDream365 Pack of 6 Capacitive Touch Screen Tablet Stylus/Styli Pen for Kindle Fire, Kindle Fire HD Now

Nice little stylus pens that do attach to the kindle. Just the right size and weight. cool colors. No more searching for a stylus...it's attached. I'm buying another set.

Read Best Reviews of iDream365 Pack of 6 Capacitive Touch Screen Tablet Stylus/Styli Pen for Kindle Fire, Kindle Fire HD Here

They work great. I got them quite a bit sooner than it said I would receive them. Very happy about that.

Want iDream365 Pack of 6 Capacitive Touch Screen Tablet Stylus/Styli Pen for Kindle Fire, Kindle Fire HD Discount?

Similar stylus had previously been purchased. Gave some as gifts or to new Kindle/android device users. Everybody loves them. Although I prefer a Kindle 8.9 cover with a stylus holder, none fit as well as the Kindle case, so these styli' s little string attachments fit very well in the ear bud apperture, so that my stylus is always with my Kindle and phone.

Save 50% Off

myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (3 Pack) Anti-Microbial

• Prevents germs and other microbes from lingering
• Precise cut for best fit and easy installation
• Scratch and scuff resistant
• Static cling adhesion: Will not leave sticky residue when removed
• Includes: 3 high quality iPad Mini screen protectors, squeegee, and cleaning cloth

I got the 3pack of Invisible covers for my new iPad. I was worried after reading a lot of reviews that my retina display would be diminished by the presence of a protector. I was also concerned about the "feel" on the fingers and responsiveness. On all three accounts, this cover gets 5 stars. You can't tell it's on, and there is no difference between the feel and the responsiveness of the touch screen.

After reading so many installation horror stories, I recruited my husband to help me. Here were our steps to a very smooth install:

1) Clean the iPad glass with an ammonia& alcohol-free screen cleaner and a micofiber cloth. I use this on all my electronics and touch screen devices. This is good for getting rid of finger prints and smudges.

2) "dust" the screen with the included lens cleaning cloth. The cloth that comes with the screen covers is similar to what Apple used to include with the iPod touch years ago.

3) peel off about a quarter or a third of the first cover of the screen, line up the screen with the home button, and then slowly lay it down as you peel away the cover. Try to smooth out the really big bubbles as you go.

4) Before you peel off the second cover, use the little card to smooth all the bubbles out. If you have dust, peel back the screen and use the sticker to grab them. I found that the dust usually stuck to the screen cover. This is also when it's useful to have a helper. My husband held the screen protector while I stickered the dust.

5) Peel off the second cover slowly. This will create some more bubbles b/c the adhesive pulls the screen protector away from the ipad a bit. To get these bubbles out, wrap the lens cloth around the little card and then smooth out the bubbles. If you use the card without the cloth, you'll likely scratch the cover.

6) I had to clean the screen again with the screen cleaner b/c i had such crazy finger smudges from smoothing out bubbles.

We were able to install in one go in probably about five minutes all told. We have a dog, so we did it at the kitchen table where there would be less dog hair and a lot of light to see.

We are quite happy with the result! I only give this a 4 star rating b/c I haven't had a chance to see how well the screen protector holds up over time. But so far, so great.

Buy myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (3 Pack) Anti-Microbial Now

After reading reviews on this product I was hesitant to purchase it, however the price convinced me to give it a try. First of all, I am horrible at applying screen protectors. I always end up with bubbles. In about 5 minutes I had this on my iPad bubble free on The first try. they're great!!!!! I can't even tell there is a screen protector on. I would highly recommend this product.

Read Best Reviews of myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (3 Pack) Anti-Microbial Here

On the ipad covers I got at apple they came in one cheap pack and were all stuck together. This actually came in a pack so nicely (a three pack) that you take it out of the outer packaging (which you keep until you need the other two), then you take it out of the bag BUT be sure you do the next step!

My apple screen protectors were all just together and then you stuck them on the surface. With this one, they protected every single protector individually with its own backing and inner liner. At first I held this up to my ipad and thought "Woa...that's gonna cloudy up the screen!" Then I saw a little tab that gave directions to peel off the backing and then place it on your ipad.

TaDa!! No cloudiness whatsoever. The screen protector is crystal clear and stuck on the ipad perfectly. It also is thicker than some while keeping its transparency for even better protection of the ipad if I want to use a cloth with windex for cleaning, for example, or if something sharp rubs against the screen.

In all honesty, this is the best screen protector I've gotten. Full clarity and full protection.

Better than the ones at the apple store in my opinion for half the price.

Want myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (3 Pack) Anti-Microbial Discount?

Since the iPad screen is covered with fingerprints after just a few minutes of use, I figured this Anti-Fingerprint screen protector would be a great solution. Installation wasn't too hard, and the lack of fingerprints was definitely noticeable right away. BUT I purchased the iPad 3 for it's stunning retina display, which was no longer stunning with this screen protector on it. It was actually a little dull and blurry. I ended up removing it.

Save 60% Off

When I installed this screen protector on the new iPad Mini, I had the benefit of a prior experience installing a similar screen protector (different manufacturer) on an iPhone. Otherwise I probably would have found the very brief instructions included with the product insufficient to get it right the first time. Fortunately, you get three screen protectors for this very reasonable price, so you can afford to mess one up as a learning experience, put a second one on correctly, and still have the third in reserve when you need a replacement.

WHAT'S INCLUDED

Three screen protectors, each in its own cellophane sleeve

A microfiber cloth, for cleaning the iPad Mini screen before applying the screen protector (nice touch)

A small plastic square squeegee for getting air bubbles out after you have applied the screen protector

A small square of clear adhesive tape for cleaning off any dust particles, hairs etc. that might pollute the screen or screen protector during the application process.

A single sheet of paper about the size of a playing card, printed front and back with the sum total of the cryptic instructions.

THE *MISSING* INSTRUCTIONS

If this is your first time applying a screen protector, here are some things to know:

Each screen protector has its own two protective covering sheets, front and back, and each protective sheet has a small green pull-tab at one corner, helpfully marked "1" and "2."

After thoroughly cleaning the iPad Mini screen with the microfiber cloth, and working in a clean environment as recommended, gently pull back Tab 1 in order to expose a couple of inches of the contact side of the screen protector, taking care not to touch the screen protector itself.

Line up the exposed portion of the screen protector with the cutout for the home button and the edges of the device, and lay it down to contact the iPad Mini screen, using the rolled back curl of the rest of the protective cover to keep the remaining unexposed portion of the contact side of the screen protector out of contact with the iPad screen.

Take a viewpoint directly above the small circular cutout for the camera lens and try to position it so it will fall into place over the camera lens, and gently pull back on tab 1 to expose the rest of the contact side, letting it glide into contact with the iPad screen. If the camera cutout is misaligned, you can lift the sheet and reposition it, then start over. It's easiest to do this before completely removing the tab 1 protective sheet. When the alignment is satisfactory, completely remove the tab 1 sheet and let the screen protector come into full contact with the screen.

BEFORE you remove the tab 2 top protective sheet, use the included squeegee or a credit card to "sweep" over any air bubbles towards the side of the screen. You may have to apply a bit of pressure on stubborn bubbles. The better job you do at this stage, the fewer bubbles you'll have to deal with in the last step.

When all air bubbles are gone, gently pull back on tab 2, taking care not to lift the screen protector itself. Once you have it started, it is helpful to hold the tab down almost in contact with, and pull it parallel to, the surface of the screen protector, as you slowly finish removing it.

If new air bubbles appear, wrap the squeegee in the microfiber cloth (to avoid scratching the screen protector) and repeat sweeping them away.

CONCLUSION

This is a fine product at a great price. If the instructions had been more informative (or better yet, if there had been online video instructions) I would have given it five stars.

HQRP Premium PDA Battery compatible with Sony Clie PEG-SJ20, SJ23, SJ30, SJ30/G, SJ30/GW, SJ30/H, SJ

• PDA Battery for Sony Clie PEG-SJ20, SJ23, SJ30, SJ30/G, SJ30/GW, SJ30/H, SJ30/HW, SJ30/U
• Li-Ion, 3.7V 650mAh Part No. LIS1259
• The Package inlcudes HQRP PDA Screen Protector
• Brand new, HQRP Replacement PDA Battery
• 200 days warranty

I got this battery hoping to bless my wife for her birthday. The Palm was everything we wanted, memo's, address book, etc. Why go buy a tablet or new device? Sadly, on our Sony PEG the battery died within a year unlike on my actual PALM where the battery lasted for nearly 10 years, so I figured, why not just change out the battery? Why buy a new device? It seemed like a good idea.

Unfortunately, Sony's Palm PEG is so poorly constructed that once opened, my attempt to pull the existing battery out resulted in breaking one of the solder joints to the battery plug on the Sony PEG board. Being an electrical engineer, I tried to resolder it to no avail.

Perhaps this battery works great. I'll never know. The Sony PDA was so badly built I cannot put a new battery in. If anyone has a Sony PDA device, be very cautious about trying to do anything to fix it! Designed obsolescence is fundamental to Sony's philosophy so beware!

Buy HQRP Premium PDA Battery compatible with Sony Clie PEG-SJ20, SJ23, SJ30, SJ30/G, SJ30/GW, SJ30/H, SJ Now

easy to imstall and it seems to hold a charge for a long time. Better than the original battery I think.

Read Best Reviews of HQRP Premium PDA Battery compatible with Sony Clie PEG-SJ20, SJ23, SJ30, SJ30/G, SJ30/GW, SJ30/H, SJ Here

I really cannot say how good this product is as my Sony Palm PDA quit working shortly after I received it. I have switched to an i-Touch.

Fosmon® High Capacity 2850mAh Premium Extended Battery with Back Door for HP iPAQ hx2000 / hx2190 /

• High Quality, high capacity, light weight rechargeable DC 3.7V Li-Ion 2850mAh battery.
• Longer battery life than the original battery that comes with the device.
• No memory effect. Can be charged or discharged as needed without loss of capacity.
• Overcharge protection, with built-in battery life microchip.
• CE Certified with 6 months Manufacturer warranty.

This is the 2nd battery I have purchased since I first purchased my HP Ipaq around 2005. No sure who the original supplier was but it was comparable to this one. I read reviews and went with this vendor Great and fast shipping. Works like a charm. Twice the capacity. I use my Ipaq for reading books, have several bibles loaded on it and use it on Sunday's in church, sunday school and hook to my amp for backing tracks to play along. This battery's capacity is great. I would recommend it and will buy again. Might even buy a few to have on hand if I think they will start getting hard to get. The IPAQ has pretty well been obsoleted by smart phones, but it's still a good device for what I use it for this battery performs great.

Palm Tungsten E Travel Charger

• Palm Tungsten E Travel Charger
• With circuit protection
• Rapid Charge eliminates downtime
• Regulated power supply ensures a safe, quick charge for Palm Tungsten E

Great Charger! I wish I had it 6 months ago while in Kenya. My adapter cord burned out trying to charge my Palm with a converter. This travel charger gives me the ability to use a converter while in a foreign country. Love it, a great investment!

Buy Palm Tungsten E Travel Charger Now

I was was grateful to find the exact tip I needed for my old Palm pilot. I was skeptical, because I had been disappointed many times. After I received similar products, I would find it to be an updated version that did not charge my old device. This was the one I needed and at a reasonable price. Thnx.

Read Best Reviews of Palm Tungsten E Travel Charger Here

I purchased to product to replace existing charger that came with the Palm Tungsten E. I was surprised that a charger was still available for this older product. The charger worked properly and fix. I also checked the voltage and current rating to be sure the rating matched my existing charger that came with the Palm.

Adesso Slim Long Range Handheld CCD Scanner NuScan-2100U

• Digital Cameras/Keyboards/Input Devices
• Bar Code Reader

These barcode scanners are inexpensive and easy to use, but seem to take a bit longer to read high-quality barcodes than I would expect. Beware of the company's product page which claims RS-232 communication capability, which it does not have. Also, documentation (online and included) is very poor, and customer service is terrible -it took 9 days for their helpdesk to respond initially and we're at day 12 or so (21 total) waiting on response number 2.

If you want a scanner for simple keyboard emulation and using high-quality codes, this is a cheap alternative. For anything else including features listed on their site (or customer service of any kind), look elsewhere.

Buy Adesso Slim Long Range Handheld CCD Scanner NuScan-2100U Now

Not Much to say ordered it got it and loved it. All within 10 days. So wouldn't you be this happy.

Read Best Reviews of Adesso Slim Long Range Handheld CCD Scanner NuScan-2100U Here

the product is like the offer in the web page, however the laser ray is unidirectional and I consider that a scanner barcode multidirectional is best. My recommendation is to buy a multidirectional scanner barcode

DURAGADGET High Quality Handheld Rotating Holder With Adjustable Hand Strap For Apple iPad 2, The Ne

Works great for laying on the couch or sitting in the chair, and you can add a standard magnetic catch cover.

Good value for the price

wrong tablet.. I thought this would fit my tablet but I didn't read it correctly. Ugh!. Next product is better.. Lapworks product.

Buy DURAGADGET High Quality Handheld Rotating Holder With Adjustable Hand Strap For Apple iPad 2, The Ne Now

PalmOne IIIx Handheld

• Enhanced LCD screen for improved viewing at angles and in both dim and bright light
• 4 MB storage capacity
• Infrared transceiver
• Open expansion slot for possible add-on hardware and memory upgrade cards
• What's in the box: Palm IIIx, Stylus, 2 AAA batteries, HotSync cradle with serial cable, DB-25 adapter, Protective cover, Organizer and Desktop applications, Handbook

The big questions these days is what organizer to get. I'll assume you are reading these reviews because you already know that the Palm OS beats CE any day. So the choice is a Palm Vx, a Palm V, a IIIx or a Visor. I can't recommend the Visor right now due to the horrible problems people are having with Handspring...maybe in another year, but not now.

The new Vx is a good choice, lots of memory and the other advantages of the Palm V like a better screen, and rechargeable battery. But the darn thing is still overpriced. If money is no problem though, I'd probably go with the Vx.

The V is good too, but only 2 meg of memory...yuck! Now, 2 meg of memory is going to be enough for a lot of people. If all you want to do is the basic appointment/phone book/to-do stuff, 2 meg is more than you'll ever need. But that's it...you're stuck with 2 meg and can't upgrade (easily). If you are interested in using your Palm to do internet stuff, grab webpages with AvantGo, play games, read books, etc. you're going to find yourself a bit squeezed by 2 meg. You can still do quite a bit, but it's a bit more work to manage your space.

Now, for less money you can get the IIIx. You'll have twice as much memory, and the ability to upgrade. I personally put on the TRG xtra xtra pro board which gave me 4 meg more of RAM and 2 meg more Flash...it's like having an 11 meg Palm! Really great. Of course, I bought this before the Palm Vx came out, today it's not quite as good a deal to do.

One other reason I like the Palm IIIx is that I have a lot of add-ons that only work with it...the Palm Navigator (compass), the Weatherguide, Landware's GoVox voice recorder, etc. I don't believe these will fit a Palm V. Of course, it goes both ways....Palm's new 33.6 modem and the new wireless Omnisky modem only fit the Palm V.

I do believe the Palm V has a better screen, it doesn't seem to have the streaks that a lot of the Palm IIIx's have. And there's no doubt it has a certain "coolness" factor. Most of my friends at work went with the Palm V. But they are fairly impressed with the space and the accessories I have for my Palm IIIx.

Buy PalmOne IIIx Handheld Now

If you don't want to spend all that money on the slimmer, sleeker Palm V, and you know you don't want a WinCE device, then the IIIx is the way to go.

The IIIx has the same screen technology and processor as the IIIe, but twice as much memory. Some users have reported "streaking" problems on the screen. I have not experienced that. In most cases, my screen is very clear and readable.

However, Palm recently introduced the "reverse backlighting" feature that inverts the color when you turn it on. It's great when you're sitting in very dark conditions, but in dimly lit rooms or during twilight outside, it can be quite difficult to read the screen because of the reverse backlighting. I learned, though, that there is a simple Graffiti shortcut to make the backlight "normal". Even with the normal backlighting, I had trouble reading the screen in twilight conditions.

Another feature of the IIIx that the IIIe lacks is an upgradeable operating system. This was the deciding factor for me when I chose the IIIx over the IIIe. The current PalmOS is 3.3, but the IIIe was shipping with 3.1 when I bought the unit for a friend for Christmas. The IIIx also had 3.1, but I immediately upgraded it to 3.3. There is no way to do that on the IIIe.

You may ask, Why would I need OS 3.3 instead of 3.1? Here's one reason: HotSyncing via infrared. OS 3.1 can't do it. If you're a laptop user and don't feel like carrying your HotSync cradle everywhere, or springing the extra money for a USB cable, then IR is a great feature. It's slower than the cradle, but way more convenient.

The IIIx also has an internal expansion slot that the IIIe lacks. Supposedly, you can open up your IIIx and plug devices like pager cards, etc., into it, but I don't think many of these devices exist right now. It wasn't a deciding factor for me.

Many people (including myself) have wondered: Why get a Palm IIIx instead of a Handspring Visor Deluxe? Here's is my reason, that I don't see many people mentioning: like the IIIe, the OS in the current Handsprings CANNOT be upgraded. That means if it ships with OS3.1, you are stuck with it.

If upgrading your OS is important to you, you should not get a current model of the Visor. (Perhaps in the future, their models will be upgradeable.)

The other reason I chose the IIIx over the Handspring was that Handspring was experiencing 6 week delays. I know that another reviewer has said he got his in 2.5 weeks, but if Handspring's own website is saying "It's going to be 6 weeks," then you pretty much have to take it at face value. I just checked their site as I write this, and it says their wait is down to four weeks. If you can wait that long and don't need an upgradeable version, then I would take a hard look at the Visor. It has a lot of attractive features. Remember that Visors ship with a USB cradle. If you don't have USB support on your computer, you'll have to purchase a serial cradle for (I think) $10.

As far as cost goes on the IIIx, shop around a little if you're cost-conscious.

To sum up, get the IIIx if:

(a) You can't afford/don't need the slimness of the V or Vx (b) Need the extra memory compared to the V or IIIe (c) Need the upgradeable OS or IR HotSync (d) Can't wait the possible 4 weeks for the Visor.

Hope this info is useful.

Read Best Reviews of PalmOne IIIx Handheld Here

I bought by Palm IIIx on a whim. I figured, "Well, everyone else seems to think they're great." They were right. The Palm IIIx is fantastic. For me, the best features are its address book and the "To Do List." Gone are the little scraps of paper I used to use to keep all my lists of stuff to do. I've been completely neglecting my paper address book ever since I got the IIIx. Between its small size, its ease of use, and its versatility, this Palm is a winner all around. BTW, I highly recommend the O'Reilly PalmPilot guide to go with it. Like all O'Reilly books, this one cuts right to the chase. It makes the IIIx even easier to use.

Want PalmOne IIIx Handheld Discount?

I have wanted a Palm Pilot since they came out and being a poorcollege student, I wanted to make sure that I got the best dealpossible. I have had my Palm IIIx for about a month and I can say that I am quite pleased with it. There are a few flaws, but I will present the pros and cons of purchasing a Palm IIIx. Please email me with any questions.

Pros: -There is an abundance of software out there and several sites. More software is coming out daily and some of my favs are jot, Traffic, Four.zero, and flash, among others. -You will get a lot of attention, this is a great toy and people are interested in it. -an excellent way to get organized, much more fun than a pad a paper and plus, there are alarms to remind you of important dates. -The handwriting recognition is superb. I once owned a Davinci which has horrible recognition. I would also suggest Jot, which is a program with a more advanced handwriting recognition system. -Customer support is ok, I'm not blown away by it but I can understand because there are a lot of palm users out there. -The price. In my opinion, it is the best value out there.

Cons: -yes, you have heard it everywhere. The backlight is pretty weird. But it's not terrible, it does the job -I have had mine crash twice in a month, but luckily only one time did I lose data. There is a "soft" reset which comes in handy -Everyone else says the hotsych is great, but I have had problems with it. I cannot get it to work on my computer, but that may be the exception. -no color display, but hey, I can live without it because it costs hundreds of dollars more.

Overall, great product. It's fun and helps me to be more organized. Buy it!

I have to say that I've grown very dependent on my IIIx. I'd give it a score of 5 except for the streaking problem. Mine didn't do this right away. It started hapening about 6 months after I began to use it. Sometimes its there sometimes it isn't. When its there, the streaking (looks like water was spilled on a sheet of ink writing) can make the screen totally unreadable. Five minutes later, all can be fine. PDA need to be dependable. Mine isn't always. Before I started reading other reviews, I thought mine was just broken. I was considering buying another but not if by luck, I get another "streaker". Even though I like the IIIx, its reasonably priced (though still expensive), has great software options, I'd be cautious about buying another one. Probably wouldn't go with the IIIx if I had known about the streaking problem in advance.

MANHATTAN 80-in-1 Slim Multi-Card Reader/Writer (100762)

• Easily access media and manage content almost anywhere
• Includes slot-to-slot read/write/copy and USB mass storage capabilities
• Compatible with CompactFlash, Microdrive, Magicstor, Memory Stick, MagicGate, SecureDigital, MultiMedia, XD and TransFlash, no power supplies or adapters required
• Supports automatic card detection and data transfer speeds up to 480 Mbps
• Eliminates need for direct connection of media device to save battery power

I just bought a 32GB A-Data 533x card (Microcenter) and after putting almost 2.5-hours of video on the card Sunday from the Sony HVR-MRC1 recording unit on of my FX1000s it then took an agonizing 8+ hours (dunno for sure, I went to bed) to download the video using a 23-in-one card reader from Kingwin which up until then had been very fast for me. I hadn't really taken much of a look at the XX-in-one listings but I now am guessing that this represents the number of drivers in the firmware to handle various cards.

Once I had this Manhattan card reader (got it at Microcenter Thursday) I tested the download with the same files which I kept on the card until I had this figured. I ordered a couple readers from Amazon to check out. Now, with the 80-in-one Manhattan unit the download times were a shade more than 15 minutes for the near 2.5 hours of recorded HDV video.

This could have been really ugly. Cheers for this new card reader.

Buy MANHATTAN 80-in-1 Slim Multi-Card Reader/Writer (100762) Now

Initial Review (used for two weeks)

Overall, I really like the size and compactness of this item, but have had some difficulties with what seems to be overheating, causing issues with reading the card. Details Below:

Pros: Compact Size, Easy to connect cards, quick file transfer, very versatile

I purchased this to take with me on destination shoots, so having a small reader that could accommodate CF cards was the goal. Of every item I could find, this seemed to be the best, with integrated cord and slim size. It's a little longer than some of my other card readers, but its about half the width and 2/3rds of the height.

Cons: Materials feel a bit cheap, Card reading issue on Windows 7

I just recently took this on a trip to Nova Scotia. After the first day of shooting, I began downloading the photos from our shoots to our netbook (Dell Inspirion Dou running Windows 7 Premium). The first card (CF 16GB Kingston) took fine and quickly downloaded about 3GB of photos. Then I put in the second card (CF 8GB Kingston) and it began to transfer, but would then give me errors (not recognizing a card was in the slot half way through transfer, or very sluggishly seeing the card). I let the device sit unconnected for about 20 minutes and tried again with partial success. After going through this process several times, I was able to download the full 3GB of data from the card. I think this was an overheating problem, as the reader did get pretty hot.

Read Best Reviews of MANHATTAN 80-in-1 Slim Multi-Card Reader/Writer (100762) Here

This is a great card reader. No problems so far, but one computer wants me to download or look for a disk with some driver, the other computer does not. Both running XP. So there must be some missing driver on this other computer, that is not the card readers fault. I use it to transfer video and picture files from the computer to my game player and use it with my N-BOX multimedia player. I use a 4 port usb hub, in the nbox, and then this is in one hub. I have 3 usb sticks, two 8gb, one 4gb, and then two 8gb microSD cards in this. Plus a 2gb SD in the SD card slot on the NBOX. So that is 38gb total!!! Very happy with this card reader!

Want MANHATTAN 80-in-1 Slim Multi-Card Reader/Writer (100762) Discount?

I have had this for close to a year now. I have only used SD cards in it, but so far it has not disappointed. It was plug and play and has always worked great.

Save 28% Off

UPSHOT: this unit is too narrow to stand up properly. In XP, it is NOT recognized stably, maybe for that reason; its too-short cord puts torque on the reader, and that makes XP recognize then de-recognize the drives. The problem is solved if I use my AmazonBasics USB (meter-long) extension cord. Or, if I plug the unit into an external USB hub. In short, something must be between the reader and the computer, modulating whatever is coming from the cord in the reader. And the reader, has to be propped up so it won't fall over. If all those conditions are met, the reader works. So this is a basic housing design flaw someone should have noticed, prior to manufacture. However, at least for the SD and micro-SD cards I tested, it works when connected to an external hub or AmazonBasics meter-long USB extender.

Another annoyance: FRUSTRATING PACKAGING: This reader's package required me cut into its middle, since it was too hard to cut anywhere else -so I cut out part of the manual, too.

So three stars, as it does work, but -2 for housing instability and too-short cord which makes XP think it needs a driver to read. It will NOT lie straight or insert easily into a netbook, on its own. I don't know if any brand of USB extension cord will work. I do know that AmazonBasics solved the recognition problem both for this reader, and for a SimpleTech external hard drive XP kept having problems 'seeing'. So that implies there is something special about AmazonBasics cords.

Thus with the extension, I could finally position the reader upright, but of course you have to move the reader, pick it up: to figure out and insert, what card to put into what slot. Which, I was only able to do, because I attached the reader to the USB extension cord. But at least it works.

It registers with four drives. It's a pistol to figure out which card goes into which slot, and how to plug that card in; be VERY careful. Another pistol, to figure out which drive is considered the one reading the disk inserted. But, at least it works.

So note to manufacturer: change the housing so that all slots are on TOP, not on the side. Then it will be stable. And, make a better cord that has tested on netbooks, since you're catering to the computer traveller. So the unit either should be made wider in a stand-up position; or, make disc slots on top, not sides.

HQRP Battery compatible with Logitech Harmony 866145, 866165, 866207, 190304-200, 815-000037, 993-00

• HQRP® Battery plus HQRP® Coaster;
• Battery Voltage: 3.7V, Capacity: 950 mAh, Li-Ion;
• These batteries have no memory effect so they can be recharged when needed without loss of capacity;
• 100% compatible with Original Battery and Charger Device;
• 200 Days warranty!

This is a perfect replacement for my Logitech remote unit. I swapped it out, charged it up during the night and it has been working perfectly for several weeks.

Buy HQRP Battery compatible with Logitech Harmony 866145, 866165, 866207, 190304-200, 815-000037, 993-00 Now

This was a great replacement battery for the standard one that came with my Logitech remote. The battery stays charged and full of power for a very long time. Highly recommend this battery!

Read Best Reviews of HQRP Battery compatible with Logitech Harmony 866145, 866165, 866207, 190304-200, 815-000037, 993-00 Here

The battery on our remote was dead, wouldn't charge at all. Replaced with this, charged it up, now the remote works all day and then some. I don't know how long it would last because we put it on the charger every night but I imagine it would last awhile.

4.8V 800mAh NiCd For Some Handheld Scanners

This battery wont hold a charge very well. I have been using it for months and it never has worked unless you have it on the charger, then it only last a short time.

When arrived would not work. Would not charge up at all. Contacted company. No response.

Buy 4.8V 800mAh NiCd For Some Handheld Scanners Now

Belkin Surge Protector 12 Outlet With USB

• Belkin Surge Protector 12 Outlet With USB

I've got everything from dollar store "surge protectors" up to 2200 VA UPS systems at my house, and just about everything in between. So, I've got lots of devices to compare this to.

If I don't pay any attention to the price, this is hands down, the nicest surge protector I've used. The build quality is excellent. It feels substantial, and... well... expensive. The number and placement of outlets make it very convenient to use a mix of "normal" plugs and "wall worts", though I'd be apprehensive about loading all 12 outlets. (And really, I think the PowerSquid is best for dealing with plugs of different sizes.) The powered USB ports are a great idea, and really add to the surge protector's versatility. The cord wrap, on the other hand, is kind of gimmicky. There's enough space to wrap one cord on it, possibly two.

With that in mind, I could easily give this four stars.

But... at the current price, you're not very far off from the APC Back-UPS ES 8 Outlet 550VA 120V. Sure, you lose four outlets, but you gain a UPS and line conditioning for voltage drops (remember: voltage drops can be as damaging to your equipment as voltage surges). And you lose the USB charging ports, but for less than the cost of a Frappuccino, you can buy a USB/AC adapter.

Going back and forth between the two, I'm hard pressed to think of need-specific reason for buying this over the APC UPS, unless space is a major concern.

Buy Belkin Surge Protector 12 Outlet With USB Now

The Belkin Surge Protector 12 Outlet with USB is a very nice design for a surge protector. It offer you plenty of options for power and 3000 joules of protection in case of electrical surges.

A few notes -

The two USB ports are ideal for charging iPhones, Blackberries and other small devices. This is nice because you can leave your power adapters in your briefcase and use USBs to charge your small electronics.

I really like the layout of the various outlets this design allows you to have access to most of the outlets. While it still will be difficult to use all 12 outlets you will be able to use 8-10 without much problem.

Lots of protection and up to $250,000 worth of protection if you do have devices damaged while using this surge protector.

Nice sleek profile and despite having 12 outlets it would not be difficult to mount to the wall.

Final verdict This isn't the perfect surge protector for all of your applications such as providing extra outlets for your christmas lights but it is ideal for your home entertainment center or as part of an electronics valet on your night stand.

5 Stars

Read Best Reviews of Belkin Surge Protector 12 Outlet With USB Here

I was very excited to get this new surge protector. However, the USB slots make a very high pitched noise when devices are plugged in. Although it's functional, it just gives me the impression that there are low quality components in the unit.

Want Belkin Surge Protector 12 Outlet With USB Discount?

I bought this around September of last year. Nice product, has plenty of space, good number of outlets and was really enjoying it. So about 1 month later I go to use the USB plug and when I plug something in it makes a low volume, high pitch screech. I play around with plugging and unplugging various devices and even change the outlet. I contact Belkin and they tell me that no it isn't supposed to do that and say that if I ship it back to them(I pay for shipping) then they will replace it. It is ludicrous that I should have to pay for return shipping for a product that is damaged from the first time I use it. I never contacted Amazon because by that time it was already out of their return window because I waited to install it and then waited longer to use it.

I still use it, just not with the USB because with the screeching sound I think it's wired poorly and could start a fire but I haven't opened it up so I'm not sure. I normally buy a lot of Belkin products, but this was very disappointing.

This surge protector fits all of my needs perfectly! The 6-foot power cable is long enough to place it anywhere, even though I only have two power outlets in my entire room. It also has enough outlets for me to plug all of my electronic devices into it, and I have plenty of space! All my massive plugs, with those annoying boxes that usually cover other outlets... Well, that is not a problem with this surge protector!

It also has two USB power outlets. These are useful for charging my Sansa mp3 player, and I use them with an extension USB cable to power my Turtle beach headset.

Honestly, I don't use the cable organizer at the end of it. I just don't have a use for it.

Finally, I am glad that it doesn't have a bunch of useless extras like 'Coaxial protection' or 'Phone line protection.' Those take up space, and I don't use them.

Lexerd - TDS Nomad TrueVue Anti-glare PDA Screen Protector (Dual Pack Bundle)

• Ultra Thin
• Anti-glare
• Guarantee To Preserve Original Color Tones
• Heat, Water Resistance, Against Scratches and Shields Damage
• Not Interfere with Touch screen Technology

Great product. At first I thought it was a little short, but then realized I had the protector pushed under the frame a bit. Air bubbles are a little tricky to get out, but I've never been good with that.

PDair VX1 Leather Case for Nokia E72 (Black)

I ordered this for my E72 some months ago and did not come back to review. So now, it is better late than never:

I loved the case!! it is exactly what I wanted I needed one without a clip, leather, that will slip into my purse and protect my cell phone.

The leather is fine, very soft it is like glove leather. It has a ridgid inside frame, but the inside is coated by leather nape, it has a cushiony feeling, and the size of the case fits perfect.. Not too lose, you can pull the phone out comfortably.

Several colleagues have by accident touched or held it and have all commented on how nice it feels!

The shipping was yes, a bit long, but considering it came from Asia I guess it is to be expected However, kudos to the vendor, it arrived about 1 week earlier than the estimated delivery time!!

Big Red Lily Flower Rubberized Snap on Hard Skin Shell Protector Cover Case for LG RUMOR 2 LX265 / L

• Durable Lightweight Construction

I bought another case with this one. The tabs on this one is very cheap. They broke the same day i got it. they have little tabs to snap on the phone and they are cheap. The other one broke in about 4 days. I'm very disappointed in this product. I was going to send back but felt they were priced really low and I'll just take it as a lost. I gave it 3 stars because I love the design.