- Broad input voltage range of 12-24VDC and 100-240VAC respectively. Permits charging via vehicle and home outlets worldwide!
- State of the art, advanced circuitry prevents the Trimble Juno SB from being damaged by power surges, overcharging and/or short-circuiting.
- Intelligent circuit tailors precise output voltage (including resistor configuration) specific to the Trimble Juno SB. This ensures battery is safely and efficiently charged.
- Provides a unique combination of both a Rapid Car Charger and a Rapid Wall Charger in one light and compact design
- A best-selling product from Gomadic Corp, one of the leaders in consumer electronic charging accessories.
Sunday, August 24, 2014
Intelligent Dual Purpose DC Vehicle and AC Home Wall Charger for the Trimble Juno SB - Two critical
Friday, August 15, 2014
BoxWave Logitech Harmony 1000 ClearTouch Anti-Glare Screen Protector (Single Pack)
Monday, July 28, 2014
RAM Mounting Systems RAM-B-166-AP8U Ram Mount Suction Cup Base for the Apple iPad Car Windshield Mou
- Patented universal rubber ball and socket system allows you to mount virtually anything anywhere.
- Made of marine grade aluminum with a powder coated finish and rubber balls
- Superior shock and vibration isolation for electronics
- Unique design provides easy installation, mobility, strength, adjustability and versatility
- Construction provides a light weight and corrosion resistant product
I've been using my iPhone 4 with a mount to an air vent, but wanted to finally use the iPad (1st gen) in the car but could not find any iPad mounts on Amazon with decent reviews. I finally did a generalized internet search and then discovered that the brand RAM was reviewed favorably by an outside review website.
Luckily, Amazon does sell the RAM iPad mount and it has exceeded my expectations.
PROS
1. Very strong suction mechanism The base of the suction is a rather strong, and large cylinder with a lever that one rotates to create a very powerful suction
2. Wide range of positioning possible in the 2 ball joints There is a ball joint at the suction and another one attached to the iPad cradle which allow a very wide range of positions.
3. Extremely strong locking mechanism for both ball joints There is a lock that one twists on the arm which will simultaneously lock the positions of both ball joints. The arm is made out of metal.
4. High quality plastic is used for the cradle/holster for the iPad which is very strong.
5. Fits iPad (1st generation) perfectly If you have an iPad 2, there are two small rubber bumpers which you apply to the cradle/holster to allow for the thinner iPad 2 to fit.
CONS
1. You have to attach the cradle/holster to the arm with 4 screws and locking nuts (which are supplied) which took a little more effort than I expected. 1 of the locking nuts had a defect.
2. The arm is not long, which is reasonable considering the weight of an iPad, but it results in having your iPad close to your windshield. This may not sound like a significant problem, but it results in having a large percentage of your needed visibility obscured by the iPad, which looks gigantic when attached to your windshield.
CONCLUSION
This iPad mount is pure quality and awesome in its strength of suction. The construction uses joints made out of some sturdy material and a metal arm with a great locking mechanism. I have used it without it falling and even attached it to the moonroof so that it displays near the car ceiling so that backseat passengers can use it.
The greatest negative, is that the arm is probably necessarily short, causing the iPad to block what seems like a shockingly large part of your visibility. I never realized how large the iPad is until I saw it blocking my vision. Think carefully about how large the iPad is and try positioning it in your car behind some part of the front windshield and ask yourself if you can really tolerate this before purchasing this mount.
Otherwise, this is an excellent, high quality mount that actually works in holding up a large and relatively heavy iPad.I purchased this mount to use my iPad2 in my RV as both a digital road map and a GPS. This mount works great, my iPad2 fits perfect, safe and secure but still easy to remove if my wife needs it on her lap. As my windshield is high I also purchased a 3" RAM base mount to attach to my center console to place the iPad2 lower (and out of sight) and away from direct sunlight. This mount holds the iPad or iPad2 very securely with NO chance of it falling out in the event of speed bumps or a rough road. It allows me to swivel it from driver to passenger with no effort. If you have room for an iPad then you need this mount.
PS. Remember to REMOVE your iPad and place it out of sight EVERY time you exit your vehicle less you have a broken window and a missing iPad when you return. It only takes 30 seconds for a smash & grab and a $800 item is a very tempting target.Besides wishing the extension arm was a little bit longer, this product is great. It securely holds my ipad, and makes it perfect for navigation and checking emails at red lights. MUST buy for anyone using their iPad in the car. I love it!I bought this product so that I could watch videos on my iPad when running on my treadmill. For my use, it works perfectly.
However, keep this in mind: You need to mount the suction cup to a very smooth surface if you expect it to hold solidly. As an experiment, I tried to mount it on my car's dashboard, which has a slightly textured surface. It had no chance of staying put.
Two other items you should be aware of before buying:
1. Plan to take off any type of iPad skin/case before using. The design tolerances of this product are extremely tight, which is why your iPad is held so solidly once it's in the mount. I have a Belkin skin for the iPad, which is really minimal in thickness. Even that needs to be peeled off before mounting.
2. Because of these tolerances, I would do my homework before buying this to use with an iPad 2. Don't assume it will fit. Find out for sure.
For the right application, this is probably the best mounting system your money can buy!!wanted rear seat video for my kids. looked into an installed screen, and it was way more than the price of an ipad. purchased this mount, installed on the sunroof, and linked the ipad to the car stereo via bluetooth. absolute perfect alternative to an installed system. very happy with the way it turned out.
Friday, July 4, 2014
Gomadic High Capacity Rechargeable External Battery Pack for the Novatel Mifi 2200 - Portable Charge
- Integrated circuitry tailors output voltage and charging current to exact specification of the Novatel Mifi 2200 (accurate to 0.1v).
- Very easy to operate. Simply connect Novatel Mifi 2200, press activation button on pack, and charging begins. Quick start guide included.
- Specification: Internal Battery (3400mAh lithium polymer), Input port (miniUSB), Output Port (Standard USB), Onboard Circuit Design (Novatel Mifi 2200 Specific), Dimensions (4.0 X 2.0 X 0.5 inches), TipExchange enabled (Yes)
- Designed with a series of front facing LED indicators that clearly display the current battery capacity at the touch of a button
- Internal circuit protects the Novatel Mifi 2200 from various power ailments including surges, overcharging and short circuiting. Advanced logic maximizes charger efficiency
Monday, June 23, 2014
Slappa Milano Ladies Laptop HandBag
Buy Slappa Milano Ladies Laptop HandBag Now
i bought this bag for my girlfriend in octobershe loved it, great bag for her laptop and lots of stuff
she always carries.
Read Best Reviews of Slappa Milano Ladies Laptop HandBag Here
Sunday, June 15, 2014
Universal Touch Stylus Pen for IPHONE / IPHONE 3G / IPHONE 4G / IPAD / IPOD TOUCH 2nd Gen / IPOD TOU
- Soft Touch Tip
- Sensitive stylus reads as a fingertip would for smooth navigation
- Precise Touch and Control
- Helps prevent touching the wrong keys when writing emails, texting, browsing the internet, or selecting apps
- Lenth: 4in / 10cm
Sunday, June 8, 2014
Charging Gomadic Retractable USB Data Cable for the Samsung SCH-i730 -Provides both charge and data
Monday, May 26, 2014
Anker® Mini Wireless Keyboard for Google Android TV / HTPC / PC / Windows 8 / 7 / MacOS 10.x or lat
- 3-in-1 multimedia wireless keyboard (build-in TouchPad & Laser Pointer).
- 2.4GHz USB wireless receiver, when sitting in the sofa or on a bed, you can enjoy wireless control.
- Built-in rechargeable Lithium-ion battery and also auto sleep/wake mode.
- Backlight: with 26 PCS dazzling LED lights to help when using it in low-light environments.
- Removable Lithium-ion battery keeps charging times short and allows longer usage time.
This is an updated model of the KP-810-10, it's the KP-810-10A. The OLD 810-10 has a cut off corner on the right side for EZ visual distinction; make sure you get the 810-10A. "A" with no cut off corner. There are a lot of middle men sellers for this unit giving it differing names that omit the model number making it easy to buy the wrong one, if you are still looking around.
** UPDATE 5-5-2012 UPDATE **
iPazzPort has been coming out with "upgrades" to this model on a regular basis. I have spoken to the guy at unisen-usa. the USA distributor for iPazzPort. He indicated that the manufacture "iPazzPort" is currently, continually, perfecting their models. iPazzPort has already released two newer models than this (priced higher) with the most valuable added features being an IR learning remote function, air mouse ability & a back side Media Center circular clustered button layout. The KP-810-18V allows you to clone & replace almost any other remote you have with it. It also has a speaker & microphone wireless connection to your PC so you can plug the remote into a headset or headphones; making voice control possible to boot!
WIRELESS DISTANCE REPORT SELLER PERFORMANCE
I read a number of reviews where the units were not performing well as far as wireless distance and pairing problems. Mine goes 28 feet (I measured it) line of site & 10-15 feet through walls. I have not had to pair it at all; it just worked out of the box. (envelope in this case). Pre-Order, I e-mailed the manufacture about the distance problems; they indicated that older models do have a distance problem by replying, "new revisions don't have any problems with distance". (indicating the older revisions did & do). This seller has the new revisions in stock; at least that is what I got. The standard free shipping (USPS) took 5 days and arrived in a envelope with no paperwork. Documentation is included in the re-closing plastic, peg hanger' clear display packaging.
PERFORMANCE USAGE
The iPassPort KP-810-10A works as advertised for me, but keep in mind IT IS VERY SMALL & LIGHT! 2.25 x 6 and a 1/4 inch thick. It is made to be used holding it in your hands and typing with your thumbs, or one handed finger typing. The touch pad is small but works great, it's 1.25" square. You may have to fine tune your preferences in the MS Win Control Panel Mouse setup for your double tap and precision settings.
The buttons-keys are beveled up in the center making it easy to feel each one and confirm pressing them as they quietly click. The back-light works very well, but a little uneven light wise. My cat loves the red laser pointer & my fish are terrorized by it. It is a little awkward to use at first but would work in a demo.
5-5-2012 PERFORMANCE UPDATE 7 MONTHS OF USAGE LATER!
I have noticed I can no longer rely on the radio signal being sent when I press a key getting to the receiver. If I type a sentence I always have to go back and correct it. This problem seems to be getting worse. I guess its the ware of usage on the keys that is doing it.
BATTERY LIFE
I have had the unit for about 2 weeks now. I had to recharge it once (after the original charge when I received it). It lasted a week with pretty heavy usage. It recharged fast, 23 hours (I was not watching it when the light came on indicating it was fully charged). The unit does not seem to use much power if left on while not in use. According to what I read, it does not shut itself off after a time out period, but it does not seem to make much difference.
WHAT'S INSIDE?
I dissembled the unit by removing the 6 screws on the back. The 4 Volt battery is about 1.25 x 1 x .2 very small and not replaceable. There is 1 main PCB with the laser and transmitter-receiver as tiny separate components. There is no visible antenna but that does not seem to degrade it's performance. The keys don't fall out and are built into the face. It looks well made.
PRO:
It works as advertised and I no longer have a full size keyboard clogging up my remote control table. No distance problem for me at all. I have no regrets.
Perhaps even more attractive, the manufacture has been constantly in R&D on this product line; perfecting it and making future upgrades not only possible, but affordable. Even their high end units are under $50 USA
CON:
1. There is no SHIFT-DEL key for permanent delete. You have to send everything to the trash can first. (press FN-DEL
Tuesday, April 15, 2014
Protective Vinyl Skin Decal Sticker for Apple iPod Touch 2G 3G 2nd 3rd Generation 8GB 16GB 32GB - Ho
- Add style to your 2nd or 3rd Generation (2G/3G) iPod Touch
- Bonus! Free matching wallpaper
- Quick and easy to apply
- Removable, no sticky mess guaranteed!
- Compatible with all iPod accessories (iTrip, the Dock, Speaker Systems, etc.)
The stickers must be applied with care to make them 'straight'...they don't cover ALL of the visible exterior, so if they aren't straight, it shows.
My son enjoys having the coolest looking ipod on the block, thus the stars. however I had been hoping for something protective which this is not. I suppose it protects against scratches, but not against dings, water, drops, etc. (I use an Otterbox for my own for this purpose, but my son doesn't think that's cool looking enough.) We have not tried removing the stickers but they don't seem very "removable" to me unless I were to get at it with rubbing alcohol.
It's cheap, so probably worth what you pay for it, but just understand what you are getting: iPod/iPhone shaped stickers.
Saturday, April 12, 2014
HP iPAQ HX2490C Pocket PC
- POCKETPC SD USB SERIAL 802.11B BT
Friday, April 11, 2014
Altego Clear Sleeve for 14-Inch Laptops (Platinum)
- Transparent front panel featuring Air Cushion technology protection
- Show off personality and style while keeping your laptop safe
- Thick neoprene with Cushion Cell lining
- Checkpoint Friendly - No need to remove your laptop when going through airport security
- Patent Pending
Buy Altego Clear Sleeve for 14-Inch Laptops (Platinum) Now
We have used this notebook sleeve for several trips now. You can really leave your computer in this sleeve when you go through security. I highly recommend this product.Read Best Reviews of Altego Clear Sleeve for 14-Inch Laptops (Platinum) Here
I just got this case today for my new netbook. My netbook is an awesome yellow color (the samsung n150) so I was glad to find a case that let me show this off. I like that its more substantial than the average neoprene sleeve, thus allowing for more protection. However, its small enough to put in a purse or a backpack. Two thumbs up!Want Altego Clear Sleeve for 14-Inch Laptops (Platinum) Discount?
I bought these for my Dell Inspiron 3521 (15.6 inch) and my Acer Aspire 5253 (15.6 inch) and it fits both like a glove. One of them is my teenage daughter's laptop and I feel that it is very well protected in this case. I am very happy with this purchase!It's actually an awesome case. Perfect fit for my laptop. Good protection (maybe not so much from zippers) and I get compliments all the time on it, but I open it constantly per class and at home and the zipper around the corners get caught or bend wrong and will no longer zip all the way. So I have no choice but to just slide it in with one of the diagonals open. Not much protection when I put it in my backpack with my other books....disappointed.Saturday, March 29, 2014
Lexerd - Golf Buddy World Platinum TrueVue Crystal Clear GPS Screen Protector (Dual Pack Bundle)
- Ultra Thin
- Crystal Clear
- Guarantee To Preserve Original Color Tones
- Heat, Water Resistance, Against Scratches and Shields Damage
- Not Interfere with Touch screen Technology
Thursday, March 20, 2014
Cooler Master 120mm Silent Case Fan 4-in-1 Value Pack - (R4-S2S-124K-GP)
- 4 IN 1 Value Pack
- Higher air flow to enhance cooling performance
- Ultra silent operation at 19 dBA
- Economic solution for perfect performance
- RoHS compliance for protecting the environment
Buy Cooler Master 120mm Silent Case Fan 4-in-1 Value Pack - (R4-S2S-124K-GP) Now
This is a great value. The fans are silent as advertised and they are packaged in a perfectly sized box.One thing to keep in mind if buying these fans is that they use the 3-pin connectors. You may need to get 3-pin to 4-pin power connectors if you don't have any spots on your motherboard to connect these fans.
***4-PIN ADAPTERS ARE NOT INCLUDED.
Read Best Reviews of Cooler Master 120mm Silent Case Fan 4-in-1 Value Pack - (R4-S2S-124K-GP) Here
I originally found an entry on an unnamed "deals of the day" website that had a competing site selling 2 Scythe S-FLEX (E-Series) fans for $20. I heard they (Scythe fans) were some of the best fans out there, and was about to spring for that deal... but when I realized after the added 8 dollars for shipping, it came out to be about 30 dollars... 15 bucks per fan. not so much of a bargain anymore. some fellow in that thread mentioned that if you want a real bargain, get these puppies from Amazon. Four 120mm fans for just over 10 dollars. Of course I had to take a look, and I'm glad I did.Now, when I built my computer, I bought a CoolerMaster case (CM690). This case has room for 7 case fans I believe. It came with three of these very same model fans, so I already knew from personal experience that they were very quiet and did the job. Certainly worth 3 dollars a fan, no doubt; plus I wanted to add some extra fans since I had so many available mount areas in the case and the daily temps are in the upper 90's right now.
Ordered them, got exactly what you see in the picture. It's been said before, it's only 4 fans, and 12 screws for mounting. The fans are three pin. In my case, I have areas for 7 fans, but my board only has 3 headers! So I feel a lot of you are going to have to either get a couple of 3-pin splitters or something for these to use them all.
The fan cords themselves are approximately 12" long. My front fan cord will not reach any of the fan headers on my motherboard, so I had to use the dreaded 4-pin molex adapter /slash/ monstrosity that turns your tidy cable management into a rat's nest. I would really recommend something like this -http://www.amazon.com/1FT-TX3-Power-Splitter-Cable/dp/B002DY7M1G/ref=sr_1_1?ie=UTF8&s=electronics&qid=1277947201&sr=8-1
That will allow you to hook up 2 of these fans into only 1 motherboard fan header -plus, it gives you an extra 12" of cord. With 24" of cable (including the fan's cable itself), it should reach to the darkest corners of any sized case, and will be a lot more manageable and cleaner looking than the hideous molex/4-pin adapters.
So how about the noise? What can we compare it to in real life? Ok -right now, in my case (1 foot from me, at about shoulder level) I have 6 of these fans running, plus the CPU fan. I would most closely compare the noise level to that of an air vent or air conditioner intake when your central AC is on. Just a very low, non-distracting flowing air noise.
Now if I get crazy and crank them to wide open, they are a bit noiser, but really not too unbearable. I would compare 6 of them at full speed to the noise level of maybe... an electric toothbrush? This is a bit distracting, as it actually catches my attention (as said though, the case is 1 foot from me, nearly level with my shoulders/head).
If you let the motherboard control the speed of the fans, they are very near silent. It sounds like maybe a newer CD-ROM drive steadily spinning a CD at idle (*not* revving up).
So if you are even questioning getting this... just spring for it. They may not be super high-end wind tunnel 250CFM fans that will allow you to use your computer case as a second freezer, but they do the job, and they do it well for such a tiny amount of money. On a side note, I recommend CoolerMaster products in general... especially their cases. Sturdy and well thought-out designs.
P.S. -fan direction and airflow is sometimes a science, depending on where your mount holes are and what kind of heatsink, etc, you have. Personally, this is my config:
1 front fan pulls air into the case, over the hard drive bay area
1 back fan, obviously pushes hot air out the back
2 top mounted fans, with air flowing upwards and out of the case (my thought behind this was hot air rises, so at the top of the case is most likely going to be hot air that I want to remove from the case, not blow it back in)
2 side mounted fans (this one is tricky, as one is over the add-in card area... which I have pulling in cool air -and the real question is: what about the fan mount right above the heatsink? I'm using the Intel stock heatsink & fan, which blows air straight up off the processor, which would be perpendicular to the side of the case. my thought here was at this mount area, have the fan blowing air *out* of the case, since hot air is going to blow off of the heatsink, into this fan, which will expel the air out the side of the case)
Point is, though: When you start working with 4, 5, 6 or more fans... you're creating areas of high and low pressure, which can make the heat move differently than you might expect. Some configurations that I expected would dramatically reduce case temps in fact did the opposite and raised my temps!
The only things I wish these fans had but don't are 1) shielded/covered cables. looks a lot nicer when the three yellow, red and black cables are wrapped in a black shielding. I imagine this could be done with some duct tape after you got your cables routing where you want, so it's not a big deal... and 2) maybe if the cables were a little bit longer... like maybe 18" would be great, for larger cases. It gets annoying having to reach in and unplug the side fans every time I want to take the side cover off! Other than that, this pack is the cat's pajamas.
Want Cooler Master 120mm Silent Case Fan 4-in-1 Value Pack - (R4-S2S-124K-GP) Discount?
I used this fan to replace one in a CM Scout case that got noisy. Installation was a breeze (sorry) and took very little time. This fan is almost silent yet moves a lot of air.works well with cooler master elite 341 case... these arent high performance but this should move a fair amount of air on a un-overclocked/un-modded pc.. provides enough ventilation and lower the temps a bit.....Tuesday, March 11, 2014
Flip Mino & Flip Mino HD Silicone Protective Cover Skin Case (CLEAR)
- Protect your Flip Mino or Mino HD with a protective silicone skin cover.
- Soft Silicone Case Cover made to fit your Camcorder
- Checkered Design for a more secure grip on your player
- Cut outs of the skin is made for easy access to chargers and other connection slots
- Lifetime Warranty w/ GizmoDorks
Buy Flip Mino & Flip Mino HD Silicone Protective Cover Skin Case (CLEAR) Now
Cheaply made, it does help a little with the slippry polished aluminum camera, but stretches easily and loses its shape, especially when taking in and out of your pants pocket. Nothing to get excited about...I may just attach some double-sided tape to hold it in place better.Wednesday, February 5, 2014
Stylus Pen with 3.5mm Adapter Plug (Hot Pink) for Ipad apple
Wednesday, January 29, 2014
BoxWave Dell Axim X51 ClearTouch Anti-Glare Screen Protector (Single Pack)
Pros: Perfect fit for the Axim X51, last forever(Had my PDA for years and have only bought 2). Very durable, applies clean with no bubbles(Much better them other products I have tried).
Cons: Alittle expensive, but you can't put a price on peace of mind.
Overall: Great product, worth everypenny. Don't regret this purchase.
Saturday, January 11, 2014
Black White & Pink Flower Rubberized Snap on Hard Shell Protector Cover Case for Palm Pre 2
Wednesday, January 8, 2014
rooCASE Super Bubble Neoprene (Neon Green / Black) Sleeve Case for Apple MacBook Air MC965LL/A MC966
Wednesday, November 13, 2013
10 Pack Samsung OEM Clear Replacement Ear Hook earhook for Samsung WEP650 WEP480 WEP490 Bluetooth He
- 10 Units of Brand New Samsung OEM Clear Replacement Ear Hook (EH650WEBSTD) for Samsung WEP650 WEP480 WEP490 Bluetooth Headsets.
- Perfect Replacement Ear Hook for Samsung WEP650 WEP480 WEP490 Bluetooth Handsfree.
- Form Fitting, One size fits all.
- Attach the ear hook to your Samsung Bluetooth headset for an added secure fit.
- (Bluetooth Headset not included)
Saturday, November 2, 2013
SteelSeries Shift Gaming Keyboard (Black)
- 8 programmable hotkeys
- On-the-fly macro recording
- Multiple media controls
- Gold plated audio & headset ports
- 2 USB 2.0 ports (1 powered)
- Detachable wrist rest
- Ergonomic design with 3 leg levels and a non-slip base
Buy SteelSeries Shift Gaming Keyboard (Black) Now
Great keyboard, heavy and sturdy so it does not move around when pushing on the keys. Media keys work with iTunes in the background without having to alt-tab out of a fullscreen game :DA word of advice when installing this keyboard: Do not have it plugged into a USB 3.0 port. The SteelSeries Engine software will not recognize the device and the firmware update will freeze causing the keyboard to crash and become unresponsive. I found this out the hard way, after multiple installs/uninstalls and computer reboots, once I plugged it into a USB 2.0 port, SteelSeries Engine installed and recognized keyboard with out an issue and the firmware update was applied with no problems.
This keyboard does, in fact, work with older keysets that are on the official compatibility list, the list is easily found by going to google.com or any other search engine and typing in "Official SteelSeries Shift Compatibility List"
I was able to use my Zboard World of Warcraft: Burning Crusade keyset with it, which is about 5 years old. You just have to uninstall the SteelSeries Engine and reinstall it with your compatible keyset in the SHIFT keyboard.
Read Best Reviews of SteelSeries Shift Gaming Keyboard (Black) Here
The keyboard works great. The only thing I noticed it that when using other keysets, those keysets are a little harder to get the latch to unsnap.I received the product on time, everything was in perfect condition. It was to give it to my son, and he was very helpful. I only had problems when installing so recognizing the USB port. Maybe I can not attribute to the product as guilt, but the computer where it was installed. Overall, I am pleased with the product.Very sturdy and easy to customize! Large size to scale and easy to use for MMO gaming. With the MMO gaming set it's a blessing.