FAVI Entertainment P-MOUNT-BL Universal Projector Ceiling Mount - Black

• Suitable for 99.6% of Projectors on the Market including all FAVI models
• Easy to Adjust Height and Angle
• Max Drop: 24" (fully extended)
• Max Projector Weight: 55 lbs.
• Lifetime Warranty on all new FAVI projector mounts
• Suitable for 99% of Projectors on the Market including all FAVI models

I heard that the instruction for Installation is not clear in manual.

I found that on Favi's web site , there is PDF file of 6 page , which shows how to install it.

Now I have installed the mount. it is very sturdy and strong.

Only keep one thing in mind that you can NOT reduce height less then 15" , so if you want to raise toward the ceiling less then 15" it will not work. If you cut the metal piece it may work great for you. Other than that it is perfect mount.

I used this mount to install Optoma HD 20 projector

Buy FAVI Entertainment P-MOUNT-BL Universal Projector Ceiling Mount - Black Now

Unlike other reviewers I put this together without the suspension bar and mounted my projector only a few inches from the ceiling. That worked fine. Actually, my unit didn't seem to have enough screws to use the bar. It's very sturdy and is working great.

I didn't look up in the instructions on the web (maybe I should have) but found it quite easy to figure out. The parts supplied were different from the included parts summary though, at least in the number and type of screws included. Mine came with 3 different types of screws for the projector but not enough of the short hex screws, although I made it work just fine with what it had.

Read Best Reviews of FAVI Entertainment P-MOUNT-BL Universal Projector Ceiling Mount - Black Here

I am using this mount with an Optoma HD20 and it has done a great job. It will take you a few minutes to sort out what needs to be done with the pieces in the box, but it's not hard and very flexible... looks like it would fit just about any conceivable projector. The materials are pretty high quality.

Be aware that the minimum height from ceiling to where it grabs your projector is about 15" (not 12" as some have said). I needed it to be about 12" for my application, which was in-between this mount and most of the others that I found. A friend pointed out that it's just two aluminum pieces that slide and it could easily be cut down with a hack saw without any visible change. So I cut about 6" off of the ends each of the sides to get the correct range and drilled a new hole for the length setting piece (this is easier than is sounds).

WARNING: there is a little tab of punched metal who's job is to keep the two arms

from completely separating if you cut these down you'll lose that piece and risk the possibility that if you loosen the arm length screw the projector will fall. I suggest that if you do this you set the length and then drill a an additional hole to secure it. (In practice however you'd have to really be not paying attention and have a heavy project for this to happen.)

My only other comment on this is really more related to the Optoma HD20 For some reason Optoma chose to place the three mount screw holes off center on the projector bottom... So when loose the projector wants to hang to one side. I can see no logical reason for this... just dumb. Not hard to overcome, but annoying. Again, nothing to do with the mount, just the projector.

Want FAVI Entertainment P-MOUNT-BL Universal Projector Ceiling Mount - Black Discount?

This was very easy to setup and works fine with my projector. The only reason it lost a star is because one of the two supplied allen wrenches was a little too small for the screws it was needed for.

Hard to put up. Didn't come with any instructions. Not too sturdy. I bought another brand a week later for $80, which made me realize how crappy this one was.