myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (4 Pack) Anti-Microbial

• Prevents germs and other microbes from lingering
• Precise cut for best fit and easy installation
• Scratch and scuff resistant
• Static cling adhesion: Will not leave sticky residue when removed
• Includes: 4 high quality iPad Mini screen protectors, squeegee, and cleaning cloth

I first got the invisible shield from zagg which was $30.

It was extremely difficult to apply and I didn't like the feel of it. My fingers didn't glide as smoothly over it. Also, the holes for camera and home button didn't match. So after looking for a while, I ordered this because of good value and I also wanted to try anti-glare one.

First, installation was very easy, especially after struggling with invisible shield. You just need to be a little patient and clean the screen well. Many people suggest using hot shower to settle the dust. I thought about trying this but I was too lazy so I just did it sitting on my bed and still didn't trap any dust. I was able to peel it and reposition the cover.

The holes for camera and home button matched perfectly and covered all the way to the edge. Some reviewers wrote theirs didn't match exactly so it may just be mine that fit well.

Anti glare was very effective in preventing glare but the screen looked a little grainy. It wasn't too noticeable but I am sensitive to this so I switched to the clear one. Anti glare one also didn't leave any finger prints as supposed to little bit of finger prints on the clear one (though easily wiped).

The clear one is very nice, doesn't interfere with the screen quality, can't even tell it's there. Overall, the quality is very nice and can't beat the price. very happy

Installation tip:

Little sticker for picking up dust pre-installation is included. Make a good use of this.

Don't peel the backing all the way at first like it says on the instruction. Peel only an inch or two, align the cover along the edges of the ipad, and press it with included squeegee or your hand as you peel the rest of the backing. Stop this mid-way and check for any dust that might have settled on the the other half of the screen. Use that little sticker to trap it and then finish installing.

The bubbles will can be pushed out if the dust isn't trapped, but if you see a dust inside bubble, you can peel it carefully, remove the dust(i used that small sticker directly on the sticky part of the cover to remove it), and reapply it.

Buy myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (4 Pack) Anti-Microbial Now

I installed the clear one, and it is not exactly "clear": the surface looks as if there is oil all over, with multicolor reflexes. Bad.

As to the supposedly anti-reflex one, it greatly reduces the crispness and visibility of the screen, so it is going to the trash.

I do not recommend these to anyone who appreciates good screen protectors, which are meant to protect the screen from scratches, and also, still allow us to view the screen well.

Read Best Reviews of myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (4 Pack) Anti-Microbial Here

It almost, but not quite, fits iPad 3. There is an annoying gap all around. It passable, but I sent it back in hopes of getting a different one in the proper size.

Want myGear Products Anti-Microbial Screen Protector Film for iPad Mini - (4 Pack) Anti-Microbial Discount?

Clear screens were ridiculous to apply. The anti-reflective protectors were much easier, but when they were on, they made my iPad (3rd gen's) screen look absolutely terrible. I knew that it would mute the colors a bit, but it made everything look extremely grainy, and almost sparkly. Waste of money.

Save 57% Off

So I spent $12 on this, was excited to have my iPad nice and protected. I open up the packaging, read the instructions thoroughly, clean the screen and set out to apply the cover.

I put cover 1/4 on the iPad and its got a few bubbles, no big deal i decide to use the squeegee as per the instructions to get the bubbles out. Oh wait, that's dust caught on the screen. I lift up the protector and try to get the dust off. This results in more dust. I lift it up again, and the screen crinkles, leaving a huge bubble that will never go away.

No big deal, I think. Its just 1 of 4. Let me try another one, now that I learned what not to do.

I try again, same exact result -4 out of 4 times.

These protectors are impossible to put on without getting dust under the screen or crinkling the protector. I am so disappointed that i wasted $12 on this, and decided i would rather live with scratches on my iPad's screen than have to deal with 3 hours of trying to put on screen protectors that winds up in my punching a hole through the wall -or at least wanting to.