Palm 3199WW Cradle Kit for Tungsten E2/T5/TX and LifeDrive

• Stylish 3-in-1 kit with illuminated cradle, cable, and adapters
• Compatible with Palm TX, LifeDrive, Tungsten E2, and Tungsten T5
• Charges and synchronizes your compatible Palm handheld
• Audio output for connection to your stereo system or external speakers
• Includes 110-240 volt charger with international adapters

I would suggest this to anyone who plunks down the cash for the Tungsten T5. The cradle is reasonably sturdy/heavy/unlikely to fall over when your PDA is sitting in it and looks reasonably nice on your desk. I also think it is much easier than messing around with the cheap adapter and USB cable which comes in the box.

The only thing I don't like about it is the annoying light that is ALWAYS on! If you look in the picture, it is the light gray/non-silver part. It catches the corner of my eye and has been surprisingly distracting -so much so that I have had to unplug it. Otherwise, I'd have to say it's great and give it all five stars!

Buy Palm 3199WW Cradle Kit for Tungsten E2/T5/TX and LifeDrive Now

I just purchased this cradle for my new Palm Tungsten E2. On the positive side, it is light, easy to assemble, and looks nice on the desktop. It is much more attractive than the sync and power cables being exposed in plain view. It also stays put on my desk, not slipping and sliding as other reviews have described. The price here on Amazon is superb in comparison to almost twice as money at most other places. On the negative side, it seems flimsy, and I fear breaking the prongs when connecting and disconnecting my Palm. A switch for the light would have also been a huge plus. As is, the light is always on, which can be annoying and even distracting.

I've used the older Palm cradles, and felt they were much better designed and much more durable. Although attractive and sleek, this cradle appears to have suffered from excessive cost cutting. It's good, but could have been much better.

Read Best Reviews of Palm 3199WW Cradle Kit for Tungsten E2/T5/TX and LifeDrive Here

Own a Palm TX? Avoid this at all costs!

As others have noted, and as documented on the Palm support forums, this cradle has a major incompatibility with the Palm TX. It will cause the Palm TX to lockup, requiring a soft reset (using the reset hole on the back). There is unfortunately no solution, and no predicting when the lock will occur. Sometimes, after one HotSync it will lock, sometimes if the computer is placed into sleep and then reawakened, other times just sitting there.

Palm has a patch on their site that supposedly fixes this problem, but it actually makes matters worse with the patch installed, the TX will lock when not even docked. DON'T install the patch!

Interestingly, the problem appears to be a hardware design flaw of the cradle itself. If you plug the TX into the included connector, and NOT the cradle, no problems! I suspect it has something to do with the silly LED light that always stays on perhaps a static discharge problem.

Want Palm 3199WW Cradle Kit for Tungsten E2/T5/TX and LifeDrive Discount?

The cradle is a very simple device it merely extends the sync cable to allow the Palm to sit upright and be viewable next to your computer monitor. That's nice. The trouble is that the connection between the palm and the cradle doesn't lock. Also the connection between the sync cable and the cradle doesn't lock either (it's exactly the same connector). Palm designed these connectors to be easy to connect and disconnect which is great when connecting the Palm to the sync cable. The problem is that the connection between the sync cable and the cradle need to be secure and it isn't. When the connection becomes loose you get bad syncs, data corruption, freezes, etc... We've had no end of trouble with these on our network because of this issue. The fix is to unmate and remate the cable connections easy enough, but the periodic problems have led me to ban these cradles from our list of supported gear.

Some others have complained about the blue LED light. You need this light to tell you when you've got the Palm properly seated in the cradle otherwise you might not know you've got it down onto the connector far enough. I think of the light as a feature not a problem.

The ultimate solution would be a pair of wire bails on the back of the cradle that you'd use to lock the sync cable on. Too bad they didn't think of that.

Save 26% Off

Update: November 15, 2008 Still working just fine.

Orig Review: Simple to install, easy to use. Does the job and has features not advertised. For example: If in the cradle, the the Palm comes to life automatically when you turn on the PC/