Cisco AIR-LAP1041N-A-K9 Aironet 1040 Series Access Point

• Building on the Cisco Aironet heritage of RF excellence, the 1140 Series delivers industry-leading performance for secure and reliable wireless connections.
• BandSelect improves 5-GHz client connections in mixed client environments

This is a great wireless acees point. Not sure why people buy Cisco gear without know what it is. Please note this unit needs to have a wireless controller, that is why LAP is in the model number!!!! Not sure why people buying this device and then complan after the fact that it needs the controller.

Buy Cisco AIR-LAP1041N-A-K9 Aironet 1040 Series Access Point Now

I picked up a couple of these on an ebay auction, and installed one onto the POE port on my Cisco ASA that I use for a gateway on my home network. Holy moly, is this thing rock solid, with insane range and coverage. I am very very impressed, of course it is the better part of a grand, so you would expect it to be good!

A note for everyone who complains about not knowing that this particular one requires a separate Wireless Lan Controller that is what the LAP in the model number stands for. For heavens sake, check cisco.com before you buy any of these things they are not cheap so don't be lazy and then blame Amazon's information.

Oh, one small issue, they ship with IOS 12.3. I noticed that I was unable to establish PPTP tunnels when connected to Wireless. If you are doing this, you need to upgrade your IOS to 12.4(23) I think, it is listed in the release notes as fixing the PPTP problem.

Read Best Reviews of Cisco AIR-LAP1041N-A-K9 Aironet 1040 Series Access Point Here

Don't try this if you're in a hurry to order. The LAP is NOT the AP version. You'll need to have a controller to manage this AP. I am certain it's a great AP...I have 16 more to configure for another client...with the WLC.

The only thing I'd change was my ordering of a dual band (A/B) AP instead of a single band which can support better range and throughput in the A/N space than it's single band counterpart.

These APs are a really good tool for a budget WLAN set up. I prefer the much more costly 3600 series LAPs but they are stratospheric in price so there's really not a fair comparison in function/capabilities.

Want Cisco AIR-LAP1041N-A-K9 Aironet 1040 Series Access Point Discount?

My school purchased one of these Cisco 1041 access points to be a part of our new wireless network. For most of our building we installed the Cisco Aironet 1140 Series AIR-AP1142N-x-K9 802.11a/g/n 2x3:2 MIMO Standalone Wireless Access Point AP and converted them to controller based devices. All of them work great with our Cisco Wireless controller. This one covers a classroom that is in a remote part of our building with no access points nearby. It is exactly what we needed in this situation.

Save 32% Off

-= UPDATE =-

The easiest way to make this device work in standalone is to purchase it pre-configured for standalone by referencing the model #'s on this page:It _IS POSSIBLE_ to make this device work in Standalone mode if you have already figured out the hard way that it won't work as is. However, you have to have a CCO login which can be obtained here:Then download c1140-k9w7-tar.124-25d.JA.tar (or newer) from cisco's website. I believe any file named *.JA.tar is the Standalone Ios...don't quote me though.

Then follow the instructions from this post to install the downloaded IOS:-= End Update =-

I purchased this unit and the description doesn't mention the requirement of a Cisco WLC (Wireless Lan Controller). Unfortunately, a WLC capable of running this unit is just as expensive (or quite a bit more!) as this access point.

It has been hinted that this unit can be upgraded to a standalone IOS, but all the documentation I can find to do this doesn't work.