Wilson Electronics 859902 Surge Protector

Ordered this surge protector along with a Wilson cellphone repeater. It was shown on Amazon as a product purchased in addition to the system I purchased and the available literature only recommended a surge protector (no part number).

Proincludes ground lug and fuse is easy to change

ConIt has N-Type connectors, the repeater cables and equipment had F-Type. Adapters (had to be purchased separately). Looked on the Wilson web site for the adapters not found. Went to local electronics store.

This protector was purchased as suggested by Wilson electronics. It is used in line from roof top antwnna to cellphone booster to protect against lightning atrikes. All the cable and fittings on the booster are standard cable tv connection size but the protector is "N"size. They should use a protector with the same size fittings so you don't need a bunch of signal weakening adapters in line to make it work. Otherwise I am sure it will function as it should if installed correctly and grounded. Shipping was on time and excellent.

Buy Wilson Electronics 859902 Surge Protector Now

I ordered the cell phone booster first. It came with everything needed except a surge protector that was highly recomended, so I ordered it. That came and would not work because the connection was the wrong size for the cable which was included in the cell booster kit. So why in hell wasn't this all in one and why doesn't the product description at least tell you what you need or what fits what and where. So now it's been a month out getting what I need to set this up , partly because I live in a remote area or I wouldn't need the booster in the first place. Has not been a pleasant experience.

Read Best Reviews of Wilson Electronics 859902 Surge Protector Here

This is one of those items that you don't know if it works until the lightning strikes.....but...it is recommended and the electronics it's protecting are expensive.

The quality is good as all Wilson products I've seen have been very well made. Let's hope you never need it. As a note.....if you buy a kit, you will likely need to purchase two smaller cable runs to replace a longer one so you can put this in the middle...if yo hadn't thought about that already.

Want Wilson Electronics 859902 Surge Protector Discount?

Was operating a internet over cell tower setup without one of these when EM from a heavy storm nuked some of my equipment; now with this item that doesn't happen anymore.

Connectors are female N type connectors on both sides so get extra cables accordingly. Will also require some wire to attach to the grounding lug and to jab into the ground. For a cheap grounding spike you can go to a hardware store and buy a big foot-long galvanized nail for under a dollar and wrap the other end of the wire around it. Solder the wire ends in place to ensure proper conductivity.

For anyone needing replacement fuses, according to a bit of Google research the fuse part for this product is called a "Wilson replacement gas discharge element 859920"

Save 52% Off