iPad2 Teleprompter R810-8 with Beam Splitter Glass

• Use with an iPad2
• Has beam splitter glass with 70% visible light transmission (VLT)
• Dimensions: 11" x 9" x 1.25"
• Includes: Teleprompter, metal support, black background cloth, metal frame (J-Bracket), silicone iPad2 case protector, and connectors such as a wing nut and wing screws (2)
• Over 2,400 Teleprompters sold since March 2011!

When I first saw this teleprompter, I was concerned about the build quality based on the pictures.

I'm pleased to say that this is a very well thought out little teleprompter.

The beamsplitter glass is held in the frames, not just with the frame clips, but with a bead of transparent silicon all the way round the edge of the glass.

My other concern regarded the size of the frame. Even with the camera zoomed all the way out, the teleprompter was well out of frame.

The cloth is thick enough that even under a light, there is no unwanted light getting reflected into the camera.

The device mounted easily on my tripod, and the camera went on just as easily.

I was worried about the camera holder that goes between the prompter and camera, but that's made of thick metal, and there is no wobbling of either the camera, or prompter.

The device was shipped with an ipad2 protector which went on to the ipad2 with no problem, and even makes it easier to hold the ipad by hand when it's not in the prompter. When it's time to use the ipad in the prompter, there are two velcro patches that are found on the ipad protector, and in the prompter's tray, which helps keep the ipad from sliding or falling from the prompter in the unlikely event the tripod gets bumped by a careless grip, camera operator, or PA. LOL ;)

The beamsplitter frame and ipad tray are held together with hinges, and there's a metal dowel which holds the beam splitter at the proper angle. My only worry there, is loosing the dowel, but that's easy enough to replace.

If there was one thing I would recommend to make the prompter even better, it would be to add a glare hood that would extend from the top edge of the beam splitter holder, over the front by about 3 or 4 inches, but this can be easily made of black construction paper, or cardboard, and held in place with adhesive velcro. By the way, the black cloth takes care of the sides as well as the top and back of the prompter. By the way, if the builder is reading this, it would be good to sew the velcro patches on to the cloth, as the adhesive will not hold to cloth for long. Users can also staple, or super-glue the velcro patches to the cloth in a pinch too. :)

I was impressed with how much brighter the text reflection appeared in the glass. Much better than the regular window glass I was using in my old diy prompter.

This thing is way cool, because you can easily break it down, and pack it way in a laptop bag. Just make sure you have a piece of cardboard in the bag to protect the glass with. Of course, the cloth douples as a nice padding to help with protecting the glass when transporting the unit.

Special thanks to the teleprompter's designer / builder for making this extremely useful product so affordable, and easy to use, and for making it available on Amazon! :)

Buy iPad2 Teleprompter R810-8 with Beam Splitter Glass Now

I'm very pleased with my iPad teleprompter and would buy one again.

Normally, these are quite expensive. Go ahead, do a search for the other ones. You'll see they can be upwards of $500. I'm sure they'll have a different build quality and all that but really, for a piece of equipment you don't use everyday, is it really necessary? And lets not forget the cheaper alternatives. The clips that attach your iPad above or below your camera are out there too. The problem with these is that unless you are far away from your camera, it's pretty clear you're not looking into your camera. If you're shooting in a small office for example, your lack of eye contact will be noticeable. For just a little more than a clip, and a lot less than the pro prompters, you can have this one.

I use mine with the ProPrompter app. I can adjust the speed, font size, and countdown timers. More importantly, I can nail my presentation delivery every time while maintaining eye contact with the camera.

A useful tip when using a prompter (unless you're a newscaster) is to rehearse your script and find the natural break points in your delivery. Then when delivering your material, break eye contact with the camera occasionally. It'll appear more natural and conversational. For example, if we were having a conversation, I wouldn't "stare you down" and never break eye contact. Rather, we normally glance away. Build these moments into your delivery and then come back to the prompter to continue. Your delivery will appear more natural.

Just having a prompter will keep you on track. Your delivery will be more confident and persuasive. And for me, this prompter did the trick.

Read Best Reviews of iPad2 Teleprompter R810-8 with Beam Splitter Glass Here

Been using this since I purchased it, wish I would've thought if it my self. Made a few adjustments to be able to use it on a sturdier stand since the black metal support sent was in my opinion a little flimsy for such a heavy TelePrompTer and when you add the $500 iPad you want to ensure that it's secure.

Want iPad2 Teleprompter R810-8 with Beam Splitter Glass Discount?

If you are searching for product where you can save some money, and at the same time, experience yourself as a professional photographer, you need this product.

I didn't know what to expect when I ordered this but I was pleasantly pleased when I received it. It was extremely professional from packaging to product! I am excited to use it!